Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Window Replacement Cost in Fort Worth?
Window replacement in Fort Worth typically runs $4,500 to $15,000 for a full-home project in 2026, with most homeowners paying around $8,500 for 8 to 12 double-hung vinyl windows including installation. The per-window cost lands between $450 and $1,400 depending on frame material, glass package, and whether the opening needs structural repair. These are real numbers from jobs across Tarrant County, not national averages pulled from a database.
If you’re replacing one or two windows, expect to pay on the higher end per unit. Volume brings the price per window down. The numbers shift with frame choice too: vinyl sits at the low end, fiberglass and wood climb toward the top, and anything with impact-rated glass for Fort Worth’s hail and storm exposure adds a premium. We’ll break all of that down below.
Bradford Remodeling Co Fort Worth puts every window price in writing before the first pane comes out of the frame. No re-pricing at the door, no “we found rot” surprises that double the bill. If you want a straight number for your specific house, call (682) 204-4897 and we’ll walk the property and hand you a line-item quote.
Key Takeaways
- Full-home window replacement in Fort Worth: $4,500 – $15,000
- Per-window installed cost: $450 – $1,400
- Vinyl is the most common and most budget-friendly frame material
- Impact-rated glass for North Texas storms adds 30 – 60% to material cost
- Most full-home jobs take 1 – 3 days once windows are on-site
- Bradford writes the full price down before work starts, every time
Window Replacement Cost Breakdown (2026)
Here’s what the numbers actually look like for the Fort Worth market right now, based on jobs we’ve priced across Arlington Heights, TCU/Westcliff, Wedgwood, Ryan Place, and up into Keller and Saginaw.
| Project Scope | Typical Cost Range (Installed) |
|---|---|
| Single window (vinyl, double-hung) | $450 – $900 |
| Single window (wood or fiberglass) | $800 – $1,400 |
| Single window (impact-rated glass) | $650 – $1,100 |
| 3 – 4 windows (bedroom/bath package) | $1,800 – $4,800 |
| 8 – 12 windows (full home, vinyl) | $4,500 – $10,000 |
| 10 – 15 windows (full home, wood or fiberglass) | $9,000 – $15,000 |
| Full home with 2+ impact-rated units | $8,000 – $15,000 |
Those ranges cover the window itself, the labor to remove the old unit and set the new one, insulation around the rough opening, interior and exterior trim work, and haul-away of the old sashes and frames. They do not include structural repairs. If Fort Worth’s clay soil has shifted a header or the sill plate has rot from a leaky old window, that’s a separate line item you’ll see on the written estimate before any work starts.
What Drives the Cost Up or Down
Frame material is the single biggest lever. Vinyl runs $450 to $900 per window installed. Wood, which you see a lot of in Mistletoe Heights and the older sections of Fairmount, runs $800 to $1,400 because it requires painting or sealing and takes longer to set correctly. Fiberglass splits the difference on price but beats both on thermal performance, which matters when Fort Worth hits 105 in August and the AC is running nonstop.
Glass package is the second lever. Standard dual-pane insulated glass with a low-E coating is the baseline. Add argon gas fill, triple-pane construction, or impact-rated glass built to handle the hail and wind we get in Tarrant County, and the per-unit price climbs 30 to 60 percent. If you’re in an older home with original single-pane windows, even basic dual-pane replacement will cut your cooling bill noticeably from June through September.
Window count matters more than most homeowners expect. The first window on a job costs the most because the crew has to mobilize, set up, and establish a workflow. Windows two through ten get progressively cheaper on a per-unit basis. A 3-window job in Wedgwood might run $2,700. A 10-window job in Benbrook might run $7,500. Same windows, different math.
The condition of the existing openings is the wild card. Fort Worth homes built before 1980 often have aluminum-frame windows set in openings that were never properly flashed. When we pull those, we find water damage at the sill and sometimes rotted framing behind the trim. A good contractor will show you the damage before proceeding, quote the repair as a separate line item, and get your sign-off. Bradford does exactly that: written price, documented scope, no moving numbers.
What Affects Window Replacement Pricing in Fort Worth
- Soil movement and foundation settling. Fort Worth sits on expansive clay soil. It swells when wet and shrinks in drought. Over 20 or 30 years, that movement can rack window frames out of square. When openings are no longer square, the installer has to shim and flash more aggressively, which adds labor time. It’s the most common condition-specific cost driver we see in older Fort Worth homes.
- Age of the home and original window type. A 1950s ranch in Wedgwood with original steel casement windows requires more demolition and trim work than a 2010s build in Alliance where the windows pop out clean. Older homes also tend to have non-standard rough opening sizes, which means custom-ordered windows instead of off-the-shelf stock units.
- Hail and storm exposure. Fort Worth gets hit hard by spring hailstorms. If you’re replacing windows after a hail claim, you may want impact-rated glass or at minimum a heavier laminate. Insurance proceeds may cover a portion. Impact-rated windows run $650 to $1,100 per unit for vinyl, more for wood or fiberglass.
- Neighborhood and city permitting requirements. Fort Worth requires a permit for window replacement when the opening size changes or structural work is involved. Straight same-size replacement typically doesn’t need a permit, but homes in historic districts like Fairmount may have design review requirements. That process adds time, and time is money on a crew’s schedule.
- Second-story access. A two-story home in Tanglewood costs more to work on than a single-story in White Settlement. Ladders, scaffolding, lift equipment, and the extra labor to move materials up and down all show up in the number. We price second-story windows as a separate line item so there’s no confusion.
- Brand and warranty tier of the glass package. Bradford installs documented name-brand windows with manufacturer specs and warranties that back our own guarantee. A premium double-hung from a manufacturer with a lifetime glass warranty costs more than a builder-grade unit, but the warranty is traceable and the performance is measurably better.
How to Compare Window Replacement Quotes (Without Getting Burned)
Fort Worth homeowners get burned more often by unclear scope than by high prices. The low bid usually isn’t a deal. It’s a contractor who plans to skip flashing, reuse old trim, or hit you with a change order after the old windows are already in the dumpster.
Here’s what we tell people to look for when they’re comparing written estimates:
- Line items, not a single number. A real quote lists the window brand and model, glass package, count, per-unit price, and installation scope separately. If someone hands you a single number on a business card, walk away.
- Flashing and air-sealing listed in the scope. This is the most commonly “forgotten” line item. If the quote doesn’t say how the new window gets sealed to the rough opening, the contractor is betting you won’t notice the drafts and water stains later.
- Trim work included or excluded, in writing. Pulling an old window damages interior casing and exterior trim. Someone has to repair or replace it. If the quote says “trim: by others,” that means you’re hiring a second contractor or living with the damage.
- Disposal and cleanup spelled out. Old windows weigh a lot. Getting rid of them takes a trip to the landfill. A disciplined crew includes that in the price and leaves the site swept.
Bradford’s approach is simpler than most because The Garrison Standard requires it: a written price before any work starts, a documented scope, and a signed 365-Day Done Right Promise when the job closes. If the window leaks or the sash binds inside that year, we come back and correct it at no charge. Not a pro-rated credit, not a “we’ll get to it when we’re in the area.” We show up and fix it.
Vinyl vs. Wood vs. Fiberglass: What Works in Fort Worth
Fort Worth’s climate punishes the wrong materials. We get 100-plus degree summers, hard freezes in winter, hail in spring, and humidity spikes that never quite leave. Here’s how the three main frame materials hold up:
Vinyl
$450 – $900 per window installed. The workhorse. Good thermal performance, zero maintenance, and a price point that lets you replace a whole house without financing anxiety. The downside is aesthetic: vinyl frames are thicker than wood and they can’t be painted. If you live in a historic district with design review, vinyl may not pass.
Wood
$800 – $1,400 per window installed. Beautiful, authentic, and the right call for older homes in Fairmount, Mistletoe Heights, or Ryan Place where the architecture demands it. But Fort Worth’s heat and humidity are hard on wood. Expect to repaint or reseal every 3 to 5 years. If you skip maintenance, the sill rots and you’re back to square one.
Fiberglass
$700 – $1,200 per window installed. The strongest material and the best thermal performer. It expands and contracts at nearly the same rate as glass, so seals stay tight through Fort Worth’s temperature swings. You can paint it. It costs more than vinyl but less than wood over the long haul when you factor in maintenance. For the “do it once, do it right” homeowner, fiberglass is usually the answer.
Our team installs documented name-brand windows across all three materials. The brand and model go on your written estimate, and the manufacturer warranty stays traceable to your address. No generic “builder grade” mystery units.
How to Save on Window Replacement
Replacing windows in Fort Worth isn’t cheap, but there are ways to keep the number down without cutting corners that matter.
Replace in phases, but plan the whole project first. You don’t have to do all 14 windows at once. But you should decide the window brand, glass package, and frame material up front so every phase matches. Ordering windows in batches of 4 or 5 costs more per unit than doing the whole house at once, but it spreads the cash out.
Do same-size replacement, not opening changes. If the existing rough opening matches a standard modern window size, the unit is cheaper and the install is faster. Changing the opening size means reframing, new header work, and a permit. That’s an easy $800 to $1,500 per opening you didn’t need to spend.
Choose vinyl unless the architecture demands otherwise. Vinyl performs well in Fort Worth’s climate, needs zero maintenance, and runs 30 to 40 percent less than wood per unit. Unless you’re in a historic district or want wood for aesthetic reasons, vinyl is the disciplined financial call.
Bundle the project with other exterior work. If you’re already replacing siding, repainting, or re-roofing, window replacement fits naturally into the same mobilization. The crew is already on-site with scaffolding and dumpsters. Combining scopes saves you money on setup and cleanup costs.
Ask about hail damage. If a storm hit your neighborhood in the last 18 months, check whether your insurance policy covers window damage. Many Fort Worth homeowners have been approved for partial or full window replacement through hail claims. Your adjuster can tell you what’s covered. We work with insurance scopes regularly and can document the condition of the windows in writing for your claim.
Frankly, the best savings play is getting a straight quote from a contractor who won’t inflate the number at the door. Bradford gives free estimates: call (682) 204-4897 and we’ll put the range in writing for your specific house.
Is It Cheaper to Repair or Replace Windows?
For the typical Fort Worth home with 15 to 25-year-old windows, replacement is usually the smarter long-term spend. A single failed seal or broken sash can be repaired for $150 to $400. But if you’re repairing one or two windows per year on a house full of aging units, you’ll spend $2,000 to $3,000 over five years and still have old, inefficient windows at the end of it.
The breakpoint is simple: if more than a third of your windows are showing failed seals, fogging, rot, or operational problems, replace the whole set. You’ll get better energy performance, a cleaner look, and a single written guarantee covering everything. If it’s one window and the frame is sound, a repair makes sense.
We’ll tell you which way to go when we inspect the house. We don’t sell replacement jobs that don’t need to happen. Call (682) 204-4897 for a straight answer based on what’s actually in your walls.
FAQs – Window Replacement Cost in Fort Worth
How much does a single window replacement cost in Fort Worth?
A single vinyl double-hung window installed in Fort Worth typically costs $450 to $900. Wood and fiberglass units run $800 to $1,400 per window. If the opening needs structural repair or the window is on a second story, the number goes up. Call (682) 204-4897 for a written quote on your specific window.
How much does a whole house window replacement cost in Fort Worth?
A full-home window replacement of 8 to 12 windows in Fort Worth typically costs $4,500 to $15,000, with most projects landing around $8,500 for vinyl. Wood, fiberglass, and impact-rated glass push the total toward the top of the range. The warranty on a Bradford job covers the work for a full year, in writing.
Can you replace windows the same day?
For straight same-size replacements where windows are in stock or already ordered, yes, a full crew can replace 8 to 10 windows in a single day. Custom-ordered windows take 2 to 6 weeks to arrive from the manufacturer, and the install happens on a scheduled day once they’re on-site. Bradford gives you the timeline in writing when you approve the estimate.
How much does impact window installation cost in Fort Worth?
Impact-rated windows in Fort Worth typically run $650 to $1,100 per unit installed for vinyl, and $8,000 to $25,000 for a full home. They’re worth it if you’re tired of boarding up for spring storms or your insurance company gives you a premium discount for impact protection. Call (682) 204-4897 for a per-window breakdown on your house.
Is it cheaper to replace windows yourself?
If you buy a stock window from a big box store and install it yourself, you’ll pay $180 to $400 for the unit. But window installation is one of the most leak-prone jobs in a house if you skip flashing, shimming, and air-sealing. A window set wrong in Fort Worth’s rainy spring means water in the wall, rotted framing, and mold. A trained crew does it right and stands behind the work for a year. That said, if you’re an experienced DIYer replacing an easily-accessible window with no rot, it’s a manageable day job. For anything involving second-story work or rotted framing, call a professional.
Why Fort Worth Homeowners Choose Bradford Remodeling
We started as part of the Garrison Partners family in 2004, and every location including Bradford Remodeling Co Fort Worth operates under The Garrison Standard: a written price before any work starts, a documented scope that matches that price, and a signed guarantee in the homeowner’s hand when the job closes. Led by Curtis Lane, our Fort Worth team runs on the same discipline that the Garrison name was built on.
When we replace windows, here’s what “squared away” looks like at job close: every window set, flashed, and trimmed. The old units hauled away. The site swept. A written 365-Day Done Right Promise in your hand that says plainly: if the work fails inside a year, Bradford comes back and corrects it at no charge. No fine print, no pro-rating, no phone tag.
You’ll also get something most contractors in Fort Worth don’t offer: a live person on the phone, 24/7. When you call (682) 204-4897, a real person answers. Not a voicemail queue. Not an automated system. If you have a question at 9 p.m. about the estimate we left on your kitchen counter, someone picks up.
Our technicians are background-checked and uniformed. You’ll know exactly who is walking through your door before they arrive, and they’ll treat your house with the respect a disciplined crew is trained to show.
We install documented name-brand windows with manufacturer specs and warranties that back our own guarantee. No off-brand units with no warranty trail. The brand, model, and glass package go on your written estimate, and the manufacturer warranty stays tied to your address.
If you’re in Fort Worth and you want a straight number for window replacement, start with our Window Replacement in Fort Worth page for more detail, or head back to the home page to see everything Bradford does. Better yet, call (682) 204-4897 and we’ll schedule a free estimate.
Pricing reflects the Fort Worth market as of 2026. Bradford Remodeling Co Fort Worth offers free estimates – call (682) 204-4897.
Written by Curtis Lane, Owner at Bradford Remodeling Co Fort Worth, serving Fort Worth and Tarrant County since joining the Garrison Partners family in 2004.
What Our Customers Say
"Respectful crew. Covered the floors and swept every day."
- Jackie T."Fixed price, written scope, and no surprise charges."
- Wes D."Home remodel with a new floor plan. Handled structural work and permits without drama."
- Gus R.
