Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Custom Window & Door Order Cost in Fort Worth?
Custom window and door orders in Fort Worth typically run $450 to $1,800 per window and $1,200 to $4,500 per door, including materials and professional installation. For a full-home project replacing every window and exterior door in a 2,000-square-foot house, most Fort Worth homeowners pay between $18,000 and $45,000 total. The wide spread comes down to material grade, sizing, and whether you’re working with stock-adjacent custom sizes or true architectural profiles.
Bradford Remodeling Co Fort Worth puts every custom window and door order in writing before the first tool comes out. That means a price in your hand, not a range that moves when the crew shows up.
Key Takeaways
- Entry-level custom vinyl windows run $450 to $800 each installed; premium wood and fiberglass run $900 to $1,800.
- A custom exterior door (Therma-Tru or similar) runs $1,200 to $4,500 installed, including frame, hardware, and weather sealing.
- Full-home package pricing in Fort Worth: $18,000 to $45,000 for windows plus exterior doors on a mid-size house.
- Site conditions, stucco or brick veneer, historical district requirements, and glass packages swing pricing 15 to 40 percent.
- Every Bradford custom order gets a written price before work starts and a 365-Day Done Right Promise after it’s done.
Custom Window & Door Order Cost Breakdown (2026)
Here’s what our crews actually see across Fort Worth neighborhoods, from Wedgwood to Fairmount to Saginaw and Keller. These are market-calibrated numbers pulled from active 2026 project pricing, not national averages that miss local labor rates.
| Line Item | Price Range (Installed) | What It Includes |
|---|---|---|
| Vinyl custom window (single unit) | $450 – $800 | Frame, double-pane glass, standard Low-E, tear-out of old unit, trim |
| Wood or fiberglass custom window | $900 – $1,800 | Premium frame, upgraded glass package, rot repair at opening if needed |
| Picture window (custom size, fixed) | $600 – $1,400 | Large-format glass, structural header if opening is widened |
| Custom exterior door (single entry) | $1,200 – $4,500 | Therma-Tru or equivalent door slab, frame, threshold, hardware, weather seal |
| Custom front door with sidelights | $2,500 – $6,000 | Door plus one or two sidelight panels, full frame rebuild |
| Patio door (sliding, custom width) | $1,500 – $4,200 | Sliding glass unit, track replacement, header adjustment if resizing |
| French door (custom pair, exterior) | $2,000 – $5,500 | Two-door unit, full frame, hinges, hardware, weatherstripping |
| Full-home window and door package | $18,000 – $45,000 | 12 – 22 windows plus 2 – 4 exterior doors, complete tear-out and install |
When a homeowner in Fort Worth asks us to order a custom window or door, they’re usually dealing with one of three situations. The opening is a non-standard size, the house is older and the framing doesn’t match modern rough-in dimensions, or they want a specific material and finish that big-box stock doesn’t carry. All three change the price. A standard 36-by-80 exterior door is a commodity. A 42-inch-wide custom entry with arched glass in a bungalow near Magnolia Avenue is a different job entirely.
Why the Gap Between Low and High Prices?
The spread isn’t mystery markup. It’s material and scope. Vinyl frames are the least expensive and handle the Fort Worth heat reasonably well, though they expand and soften in direct western exposure. Fiberglass costs more but holds shape across the 40-degree daily temperature swings North Texas sees in spring and fall. Wood looks the part in older neighborhoods like Ryan Place and Mistletoe Heights, but it demands real maintenance and a proper flashing detail or you’ll chase rot within five years. Then there’s glass: standard double-pane Low-E is baseline; impact-rated glass, which some homeowners in Arlington and Mansfield choose for storm season, can add 30 to 50 percent to the unit cost.
What Affects Custom Window & Door Order Pricing in Fort Worth
- Opening size and framing condition. Custom means the opening deviates from standard rough-in dimensions. If the header is undersized, rotted, or missing altogether, that’s structural work before any window or door goes in. Older pier-and-beam homes in Fairmount and Arlington Heights have more of this than newer slab builds in Alliance or Walsh.
- Material and glass package. Vinyl starts low; fiberglass and wood land higher. Low-E double-pane is the floor. Triple-pane, impact-rated, or gas-filled units for north-facing rooms that catch winter wind add cost. Every Fort Worth summer argues for proper Low-E coatings, and they’re worth specifying.
- Exterior cladding type. Brick veneer, stucco, and fiber cement (James Hardie is common in Fort Worth) each demand different flashing, sealing, and trim detail. Stucco in particular requires careful cutting and re-patching, or you get water behind the wall. That labor is real and it shows up in the bid.
- Historical district requirements. Fairmount, and parts of Ryan Place and Elizabeth Boulevard, sit under preservation guidelines. Custom window and door orders in those zones may need specific profiles, divided lites, and wood species to match the original architecture. Compliance adds cost and, more importantly, requires a contractor who knows the filing process. Bradford’s team has worked in these districts and keeps the paperwork straight.
- Permitting and inspection fees. Fort Worth requires permits for structural work, which includes resizing any window or exterior door opening. Expect permit fees between $150 and $500 depending on scope. Exterior door work that doesn’t alter the rough opening usually slides by with no permit, but anything that touches the header does not.
- Access and site conditions. Second-story windows, tight setbacks, and homes with limited staging space all cost more in labor. If a crew has to scaffold instead of work from step ladders, that’s a line item. Northside and Oakhurst homes with narrow side yards are the usual suspects.
How to Save on Custom Window & Door Order
Saving money on custom work isn’t about finding the cheapest bid. It’s about ordering the right material the first time and not paying for a do-over. Here’s what actually moves the number in your favor.
1. Get the written spec before you sign anything.
You want the exact window or door model number, the glass package, the finish, and the hardware on paper. Not “similar to what we discussed.” A written spec means you can compare bids line for line. Bradford orders from a documented roster: Therma-Tru for doors, and a range of premium window manufacturers selected for the North Texas climate. Everything is traceable.
2. Bundle windows and doors in one order.
If you’re replacing five windows and a front door in 2026, do it as one project. Ordering custom units together reduces fabrication lead times and cuts delivery scheduling costs. The per-unit price drops marginally, but the labor savings are real, and you get one cleanup instead of three.
3. Choose the right material for the elevation.
West-facing windows in Fort Worth catch the hardest sun, so the glass package matters more than the frame material there. East-facing units can use a less expensive frame without compromising performance. This is the kind of decision a squared-away contractor makes with you, not for you. Curtis Lane, who leads Bradford, walks the site and points this out before the order goes in.
4. Don’t skip the flashing and sealing line item.
There’s a temptation to cut the weatherproofing detail to save a few hundred dollars. It’s the most expensive mistake a homeowner can make on a window or door order. Water intrusion behind brick veneer or stucco shows up as mold, rot, and drywall damage three years later, and the fix costs far more than the flashing would have. Bradford includes proper pan flashing, jamb flashing, and air sealing on every opening. It’s not optional, and the written price reflects it.
5. Ask for the guarantee in writing.
Every Bradford custom window and door order, every one, carries a 365-Day Done Right Promise. If the installation fails within a full year, under normal use, Bradford returns and corrects it at no charge. That’s a written guarantee, in your hand before the job starts. No verbal “we’ll take care of you.” It’s printed.
If you want an exact number on your custom window and door order in Fort Worth, call (682) 204-4897. Estimates are free, and the price we quote is the price you pay. No numbers move at the door.
FAQs – Custom Window & Door Order Cost
Is it cheaper to repair a window or door than to replace it?
On a per-unit basis, yes. A window repair in Fort Worth runs $125 to $450; a door repair runs $150 to $500. But repair only makes sense if the frame, seal, and glazing are still sound. If you’re dealing with a failed seal, a rotted jamb, or a window that’s fogged between the panes, replacement is usually the honest answer. A custom order for one unit runs $450 to $1,800 installed, and you get a guarantee that covers what a patch job can’t. Call (682) 204-4897 and we’ll assess it straight.
How long does a custom window or door order take in Fort Worth?
Most custom window orders take 3 to 6 weeks from order placement to installation, depending on the manufacturer and glass package. Custom doors run 2 to 4 weeks for a standard Therma-Tru build, and longer for fully custom profiles. Bradford’s lead time starts the day the order is placed, and the written price includes a scheduled install date, not a window of “sometime next month.”
Do I need a permit to replace a window or door in Fort Worth?
For same-size replacements, generally no. For any work that widens or alters the rough opening, yes. That includes installing a larger window, converting a picture window to a French door, or adding sidelights to a front entry. Fort Worth permit fees for this scope run $150 to $500. Bradford handles the permitting as part of the written scope, so you never have to chase paperwork at the development services office.
How much does a custom front door cost compared to a stock door?
A stock fiberglass front door from a home center runs $300 to $700 for the slab alone. A custom Therma-Tru entry, ordered to size and properly installed with a new frame, weather sealing, and hardware, runs $1,200 to $4,500 in Fort Worth. The difference is the install quality, the air sealing, and the fact that a custom door comes with a written guarantee from a contractor who will still be here next year. Ask for a free quote at (682) 204-4897 if you want a real number for your opening.
What’s included in a custom window and door installation price?
The installed price includes the unit itself, tear-out of the old window or door, dump fees, flashing and weather sealing at the opening, interior trim, exterior trim or casing where applicable, and the permit when required. It does not include structural repairs discovered after tear-out if the header or framing was not visible at bid time. Bradford calls those when we find them, shows you the condition, and gets a written change order signed before proceeding. No surprises on the final invoice.
Can you match the existing style of an older Fort Worth home?
Yes, and it’s a significant part of what custom ordering is for. Homes in Fairmount, Mistletoe Heights, and Ryan Place often need divided-lite patterns, wood species, and trim profiles that match the original architecture. Bradford can order custom windows and doors that comply with historical district requirements and still deliver modern energy performance. The cost runs 15 to 30 percent above a standard custom unit due to the material and fabrication requirements.
What “Squared Away” Looks Like at Job Close
When Bradford finishes a custom window and door order, the job isn’t done until the site is clean, the old materials are hauled away, and the homeowner has a signed written guarantee in hand. Every opening gets checked for plumb, level, and square. Every piece of flashing gets a visual inspection. The crew walks the site with you before they pack the truck. That’s The Garrison Standard, the operating discipline behind every Bradford project since 2004.
Bradford Remodeling Co Fort Worth is part of the Garrison Partners family, independently owned and operated, and held to the same standard as every other location in the network. A live person answers the phone 24 hours a day, 7 days a week. Not a voicemail. Not a callback queue. A real person, every time.
If you’re weighing a custom window and door order in Fort Worth and want a written price before you decide, start with a call. The estimate is free. The price doesn’t move. The work is guaranteed for a full year. (682) 204-4897.
For the full scope of what we do, visit our home page. For more detail on the custom window and door ordering process in Fort Worth, see our Custom Window & Door Order in Fort Worth page.
Written by Curtis Lane, Owner at Bradford Remodeling Co Fort Worth, serving Fort Worth and surrounding areas since 2004.
Pricing reflects the Fort Worth market as of 2026. Bradford Remodeling Co Fort Worth offers free estimates – call (682) 204-4897.
What Our Customers Say
"Respectful crew. Covered the floors and swept every day."
- Jackie T."Fixed price, written scope, and no surprise charges."
- Wes D."Home remodel with a new floor plan. Handled structural work and permits without drama."
- Gus R.
