Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Driveway Replacement Cost in Fort Worth?
Driveway replacement in Fort Worth typically runs between $5,000 and $14,000 for a standard two-car residential driveway in 2026. Concrete replacement lands on the lower half of that range, while paver driveways with upgraded prep work push toward the top. Most Fort Worth homeowners we work with budget around $8,000 to $9,500 for a full tear-out and repour of a typical 500 to 600 square foot driveway.
The final number depends on what’s under the old slab, what you’re putting down, and how much surface area we need to cover. Below, we break down every line item so you can see exactly where the money goes and why two driveways on the same street can quote $4,000 apart.
Driveway Replacement Cost Breakdown (2026)
Here’s what a full driveway replacement in Fort Worth looks like, line by line. These numbers reflect what we see on jobs across Tarrant County in 2026, from Wedgwood to North Richland Hills.
| Line Item | Cost Range | Notes |
|---|---|---|
| Demolition & removal of old driveway | $800 – $2,000 | Includes breaking up old concrete, haul-off, and dump fees. Thicker slabs or reinforced concrete cost more to remove. |
| Grading & site prep | $600 – $1,500 | Leveling, compacting base material, and correcting drainage slope. Clay-heavy Fort Worth soil often needs extra stabilization. |
| Base material (gravel / crushed stone) | $500 – $1,200 | 4 – 6 inches of compacted aggregate base. Deeper base adds cost but prevents cracking from soil movement. |
| Concrete pour (4-inch, 3,000+ PSI) | $2,800 – $6,500 | Material and labor for a typical two-car driveway (500 – 600 sq ft). Includes finishing: broom, smooth, or stamped. |
| Rebar / wire mesh reinforcement | $300 – $800 | Not always required, but recommended for Fort Worth’s expansive clay soil. Prevents slab cracking over time. |
| Expansion joints & sealing | $150 – $400 | Control joints cut into the slab to direct cracking, plus joint sealant to keep water out. |
| Curing & sealing compound | $200 – $500 | Sealer helps concrete cure evenly and protects the surface from stains and Texas sun. |
| Total (standard concrete driveway) | $5,000 – $12,000 | Typical range for a two-car driveway in Fort Worth. |
| Paver upgrade (Belgard or Unilock) | $2,000 – $6,000 extra | Pavers add material cost and labor. A paver driveway runs $7,000 – $18,000 total. |
If your existing driveway has a gas line, water main, or sewer cleanout running underneath it, expect to add $500 to $1,500 for spot protection or hand-excavation around utilities. The City of Fort Worth requires a permit for driveway replacement work that alters the curb cut or driveway approach, and typical permit fees run $150 to $400 depending on the scope. If you’re staying within the existing footprint and just replacing the surface, you may not need a permit at all, but we verify this before any work starts so there are no surprises.
What moves the price up or down more than anything is square footage. A 400-square-foot single-lane driveway can come in under $5,000 with straightforward access. A 1,200-square-foot driveway with a circular turnaround, a walkway tie-in, and a stamped finish can exceed $14,000 before you’ve picked a color.
Concrete prices in Fort Worth have held relatively flat since 2024, but aggregate costs tick up during peak construction season between March and June. If you can schedule replacement in the late fall or winter, you’ll often get faster crew availability and sometimes better material pricing. The trade-off is that concrete cures slower in cooler weather, which usually means a longer wait before you can park on it.
What Affects Driveway Replacement Pricing in Fort Worth
Here’s what actually moves the number on your written price. These aren’t guesses – they’re the variables we walk through on every estimate.
- Soil conditions under the slab. Fort Worth sits on expansive clay soil, particularly in areas east of I-35W and around the Trinity River basin. Clay expands when wet and contracts when dry, which is why we see so many cracked driveways in neighborhoods like Fairmount and Mistletoe Heights. Proper base prep, sometimes including a lime treatment or geogrid fabric, costs more upfront but keeps a new slab from cracking the same way the old one did.
- Access for equipment. A driveway in a new subdivision with wide streets and open side yards is straightforward. A driveway in an older neighborhood like Ryan Place with mature trees, tight property lines, and a narrow alley approach means smaller equipment, more hand work, and more time. That labor shows up on the quote.
- Finish type. A standard broom finish is the cheapest surface. Exposed aggregate costs more. Stamped or colored concrete with a border pattern adds $4 to $8 per square foot. Pavers are the most labor-intensive option because each stone is set by hand over a graded base.
- Curb work and drainage. If you’re replacing the driveway approach where it meets the street, you’re dealing with city curb requirements. Replacing or adjusting a curb cut adds cost. If the yard slopes toward the house, we may need to build in a swale or channel drain so water doesn’t pool against the foundation, which is another line item.
- Thickness and reinforcement. A standard residential driveway pour is 4 inches thick, but if you park a truck, an RV, or a boat trailer, we’ll recommend 5 to 6 inches with rebar spaced 2 feet on center. That adds material and labor, but it’s what keeps a driveway flat and crack-free under load, particularly on clay soil.
- Square footage and shape. Straight rectangular driveways are efficient. Curves, flares, circular drives, and tie-ins to a home walkway or rear garage add formwork labor and cut waste. The more cuts and curves, the more time it takes to form and finish.
One other factor specific to Fort Worth: tree roots. If you’ve got a mature live oak or pecan tree near the driveway (common in Arlington Heights and TCU-area homes), roots can heave a slab over time. We’ll cut and remove invasive roots during demolition when possible, but if a major structural root is involved, we’ll bring in an arborist consult before we pour. That conversation happens before the written price, not as a surprise line item halfway through the job.
Concrete vs. Pavers vs. Asphalt: What the Price Buys You
Most Fort Worth driveways are concrete, which is why so much of this guide centers on it. But you have options, and the price spread between them is wide enough that it’s worth spelling out.
- Concrete: $4,500 to $12,000 installed for a standard driveway. Lasts 25 to 30 years with basic sealing. Handles Texas heat well. The default choice for good reason.
- Asphalt: $3,500 to $9,000 installed. Cheaper upfront, lasts 15 to 20 years, and softens in prolonged 100-degree heat. Less common in residential Fort Worth, but you’ll see it on some acreage properties in the outlying parts of Tarrant County.
- Pavers: $7,000 to $18,000 installed. Highest upfront cost, but pavers handle soil movement better than any poured surface because they flex at the joints instead of cracking. We install Belgard and Unilock pavers, both of which carry manufacturer warranties that back up our own workmanship guarantee.
The right answer for most Fort Worth homes is concrete with proper base prep and rebar. We’ll tell you that straight even though paver work carries a higher ticket. Our job is to give you the number and the facts, then you decide what fits the budget.
How to Save on Driveway Replacement
Saving money on a driveway doesn’t mean finding the cheapest crew. It means spending correctly the first time so a $5,000 mistake doesn’t become a $14,000 redo in four years. Here’s what works.
- Replace in the off-season. Fort Worth concrete crews are busiest from March through June. Scheduling between October and February often gets you better material pricing and a faster-start date. The concrete cures fine – it just takes an extra day or two before it hits full strength.
- Stay within the existing footprint. Widening a driveway or adding a turnaround means new demolition, new formwork, and possibly a new curb cut with city permits. If the current footprint works for your vehicles, keeping it saves real money.
- Choose a broom finish. Stamped concrete looks sharp, but it adds $4 to $8 per square foot. A clean broom finish with sealed contraction joints costs less and holds up just as well to Fort Worth sun and rain.
- Repair before you replace. If the damage is a few cracks and one sunken corner, you may not need a full tear-out. We’ll tell you honestly if a mudjack or slab repair will buy you five more years. Some contractors push full replacement because the ticket is higher. You deserve the straight answer.
- Combine projects. If you’re already planning a Driveway Replacement in Fort Worth alongside a walkway or patio pour, doing them together saves on mobilization, base material, and concrete delivery minimums. One crew, one setup, one concrete truck.
Every estimate we write includes a line-itemed price before any work starts. No allowance ranges, no “we’ll see what we find” contingencies. You’ll know the number, and that number won’t move at the door. If you want a number for your specific driveway, call (682) 204-4897 and we’ll schedule a free estimate.
How We Price and What The Garrison Standard Covers
Bradford Remodeling Co Fort Worth operates under The Garrison Standard, which is the written framework our parent company, Garrison Partners, has run on since 2004. The Standard sets three non-negotiables: a written price before any work starts, background-checked and uniformed technicians on every job, and a live person answering the phone 24 hours a day, seven days a week.
For driveway replacement, that means a few specific things. Your written estimate includes every line item: demo, haul-off, base material, rebar, concrete, finishing, sealing, and any city permit fees. If a line isn’t on the estimate, it doesn’t exist. We don’t do verbal allowances or “standard extras” that show up on the final invoice.
Every completed project carries the 365-Day Done Right Promise. If any part of the driveway fails within one year – slab settlement, excessive cracking beyond normal shrinkage, drainage problems that show up after the first heavy rain – we come back and correct it at no charge. You get the guarantee in writing on the day the job closes, along with a documented scope of work and a clean site. No construction debris left at the curb, no concrete washout in the yard.
The crew on your job is the crew we’ve vetted. Every technician is background-checked and arrives in a Bradford uniform. You’ll know exactly who’s walking onto your property before they get there, and the same crew chief who writes your estimate is the one who answers for the work if anything goes sideways.
When the job calls for premium materials with manufacturer-backed specs, we work from a documented roster that includes Belgard and Unilock for hardscaping, GAF and James Hardie for exteriors, and Kohler and Moen for fixtures. For a driveway, that means paver selections with published compressive strengths and manufacturer warranties we can put in your hand, not whatever the supply yard had on sale.
FAQs – Driveway Replacement Cost
How much does a concrete driveway cost in Fort Worth?
A standard two-car concrete driveway in Fort Worth costs between $5,000 and $12,000 installed in 2026. That includes demolition of the old driveway, base prep, 4-inch concrete with rebar, finishing, and sealing. Larger driveways or stamped finishes push the price toward $14,000 or more. Call (682) 204-4897 for a written, line-itemed quote on your specific driveway – estimates are free.
Is it cheaper to repair or replace a driveway?
Repairing a driveway is cheaper than replacing it when the damage is isolated. Crack filling and sealing runs $250 to $700, and slab-jacking a sunken section typically costs $500 to $1,500. But if the slab has widespread cracking, multiple settled areas, or a failed base, repair money is wasted – the problems return. Replace when more than 30% of the surface is compromised or when the base under the slab is failing. We’ll tell you which situation you’re in before quoting anything.
How long does driveway replacement take in Fort Worth?
Most residential driveway replacements in Fort Worth take 3 to 5 working days from demolition to a finished, sealed surface. Concrete then needs 5 to 7 days of curing before you can park a car on it and 28 days before it reaches full compressive strength. Paver driveways are driveable in 1 to 2 days since there’s no cure time. Weather and city permit approvals can extend the schedule.
Do I need a permit to replace my driveway in Fort Worth?
You generally need a permit if the work changes the curb cut, alters the driveway approach, or involves work in the city right-of-way. Replacing the surface within the existing footprint typically does not require a permit. We verify permitting requirements with the City of Fort Worth on every job and include any fees in your written estimate before work begins.
What’s the best driveway material for Fort Worth’s climate?
Concrete remains the best value for Fort Worth’s climate. It handles 100-degree summer heat without softening, resists UV damage, and with proper base prep on our expansive clay soil it will hold up 25 to 30 years. Pavers cost more upfront ($7,000 to $18,000) but flex with soil movement instead of cracking. Asphalt is the cheapest option at $3,500 to $9,000, but it softens in prolonged heat and needs more frequent maintenance. For most homeowners on Tarrant County clay, we recommend 4-inch reinforced concrete with a quality sealant.
Get a Written Price for Your Fort Worth Driveway
You don’t have to guess what driveway replacement will cost. We’ll come out, measure what’s there, check the base, look at the drainage, and hand you a written price with every line item spelled out. Free estimate, no pressure, and the number in writing before any work starts.
If you’re tired of contractors who show up late, reprice at the door, or leave the site a mess, Bradford Remodeling Co Fort Worth runs differently. The Garrison Standard backs every project, the 365-Day Done Right Promise covers every completed job, and a live person answers the phone when you call – day or night.
Call (682) 204-4897 to schedule your free driveway replacement estimate. Ask for Curtis Lane, and you’ll get straight answers on pricing, timeline, and what your driveway actually needs.
Written by Curtis Lane, Owner at Bradford Remodeling Co Fort Worth, serving Fort Worth and Tarrant County since 2004.
Pricing reflects the Fort Worth market as of 2026. Bradford Remodeling Co Fort Worth offers free estimates – call (682) 204-4897.
What Our Customers Say
"Respectful crew. Covered the floors and swept every day."
- Jackie T."Fixed price, written scope, and no surprise charges."
- Wes D."Home remodel with a new floor plan. Handled structural work and permits without drama."
- Gus R.
