Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Kitchen Remodeling: The Fort Worth Owner’s Guide
A full KraftMaid kitchen remodel in Fort Worth typically runs $14,000 to $45,000 installed, depending on cabinet count, layout changes, and surfacing choices. We stock and install KraftMaid cabinetry lines directly, and we can usually have a site assessment scheduled within a few days of your call. Most Fort Worth homeowners reach out because they’ve hit the point where the kitchen isn’t just dated anymore – cabinet boxes are sagging, drawer glides are snapping, or the layout is working against them every single day.
What we see most often in Tarrant County homes built in the 1990s and 2000s: the original KraftMaid cabinets are structurally fine but the doors, hinges, and drawer hardware have reached end of life. Fort Worth’s clay soil means slab-on-grade homes settle, and that settling pulls cabinet runs out of square. A door that hung straight in year five is binding by year fifteen. The frame is usually salvageable. The motion hardware is not.
Which KraftMaid Models This Applies To
KraftMaid builds across several cabinet lines, and the part numbers matter. The Venicia line (frameless, European-style) is not compatible with Vantage or solid-wood framed cabinetry. Venicia uses proprietary hinge plates and 42mm hole spacing. The framed lines – Vantage, KraftMaid core, and the older Passport series – use 35mm cup hinges with standard 1/2-inch overlay measurements, which means quality aftermarket replacements from Blum or Grass fit cleanly.
Here’s the compatibility gotcha we run into in Fort Worth regularly: KraftMaid renumbered its SKU system around 2018. A 2012 cabinet door with a blurry label is not identifiable by that sticker anymore. We identify by measuring the hinge cup bore (35mm is standard), the overlay (1/2 inch on most framed KraftMaid), and the door material (maple, oak, cherry, or thermofoil). If the cabinet has a soft-close damper built into the hinge cup, that’s a KraftMaid-specific “Glide-Right” hinge and you’ll want to match that rather than downgrade. We keep the most common KraftMaid hinge sizes and drawer glides on the truck. Full door replacement for older lines means matching species and finish, and we handle that through KraftMaid’s current finish charts rather than guessing.
Styles & brands we work with
Signs Your KraftMaid Kitchen Remodeling Is Failing
- Drawer glides bind or drop on one side. This means the ball-bearing channels are worn or the drawer box staple points have loosened. On slab homes in Fort Worth, the cabinet face can shift out of square as the soil moves under the foundation – which puts side-load on every glide in the run.
- Hinges sag so doors catch on the face frame. If you can see the door dropping 1/4 inch when open, the hinge knuckle is worn or the cup mount is torquing out of the door’s particleboard bore. Tightening the screw only works for a few months.
- Adjustment screws are maxed out and doors still rub. A hinge with no more adjustment left is a dead hinge. We see this constantly on sink-base doors in Fort Worth, where humidity cycles in summer soften particleboard bores and the hinge loses mechanical bite.
- Thermofoil doors peel at the edges. Once the MDF core and foil separate, there’s no gluing that back. This is heat-caused delamination, and Texas attics heat the kitchen air enough that repeated cycles finish the door. Replacement is the only real fix.
- Drawer boxes rack side-to-side. The dovetail or staple joints are failing at the corners. On older Passport series drawers, the box was stapled without glue at the back corner – those fail first. We rebuild or replace, never wrap a failing box with more screws.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
A kitchen remodel in Fort Worth with KraftMaid cabinetry runs $14,000 to $45,000. The bottom of that range covers a modest galley kitchen with painted maple cabinets and laminate counters, no layout change. The top covers a full gut remodel with a kitchen island, Cambria or Silestone tops, and structural changes. Cabinet installation alone is $4,000 to $13,000 depending on count. Countertops run $2,000 to $6,500, and a kitchen island install runs $3,000 to $10,000.
Every one of our quotes is a written price before we start, with the exact cabinet line, finish, hinge type, and counter material spelled out. The 365-Day Done Right Promise covers the installation for a full year – if a hinge, drawer glide, or seam fails within that window, we come back at no charge. No reprice at the door. No number that moves. That’s the Garrison Standard, and it’s non-negotiable on our job sites.
DIY or Call Us?
Cabinet and hinge replacement is not inherently dangerous work. But there are ways to cost yourself real money. If you’ve got a framed KraftMaid line from 2010 or newer, you can usually replace hinges yourself with a standard 35mm cup hinge – but if the door hole is wallowed out or the overlay is out of spec, you’re buying the wrong part twice. The bigger risk is re-hanging a door with dowel-jig alignment off by a quarter inch and then sanding the door edge to make it fit. We’ve fixed doors that got sanded until the frame edge was gone.
Structural work – moving a cabinet run, opening a wall, changing plumbing rough-ins – that’s when you call a contractor who pulls permits in Fort Worth. Curtis Lane has been working Tarrant County kitchens long enough to know what the city inspectors flag and what they won’t. Straight scope, firm price, no surprises at final walkthrough. Call (682) 204-4897 and tell us which KraftMaid line you have, and what’s failing.
FAQs
Framed KraftMaid cabinets typically last 20 to 30 years in Fort Worth homes, but hinges and drawer glides wear out well before the boxes do – usually around the 10 to 15 year mark, especially on slab foundations where the clay soil keeps the cabinet runs shifting. Call (682) 204-4897 for a free assessment if your doors are binding.
Hinges, drawer glides, and drawer boxes can almost always be repaired or rebuilt. Thermofoil door delamination and split face frames cannot – those mean door replacement or full cabinet replacement. Most Fort Worth kitchens we see only need hardware and a few doors replaced, not a full tear-out. We’ll tell you straight which one you’re looking at.
A cabinet-only swap in Fort Worth takes 2 to 4 days including hardware replacement, once materials are on hand. A full kitchen remodel with layout changes, counters, and backsplash typically takes 3 to 6 weeks depending on permits, plumbing rough-ins, and counter fabrication lead times. We put the schedule in writing before we start and it doesn’t slide without a call explaining why.
We keep the common KraftMaid hinge sizes, Glide-Right dampers, and drawer glides on the truck, but doors and finish-matched drawer fronts are ordered from KraftMaid to match your existing run. Aftermarket hinges from Blum and Grass are in our inventory and work on most framed KraftMaid cabinets built after 2000. If it’s an uncommon size or a discontinued finish, we’ll tell you the lead time before you commit to anything.
Call Bradford Remodeling Co Fort Worth at (682) 204-4897 – a live person answers, not a voicemail. Tell us what KraftMaid line you have and what’s failing, and we’ll schedule a free estimate with a written price before we start.
Written by Curtis Lane, Owner, Bradford Remodeling Co Fort Worth, serving Fort Worth and nearby areas.
