







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Moen Driveway & Pavers: The Fort Worth Owner’s Guide
Bradford Remodeling Co Fort Worth installs and services paver driveways throughout Fort Worth, with full driveway replacement running between $5,000 and $14,000 and new paver driveway installation between $7,000 and $18,000, depending on square footage, substrate condition, and drainage work. Most Fort Worth homeowners discover their driveway has failed when pavers start shifting after heavy rain, edges begin crumbling into the lawn, or low spots hold water for days. The good news is that we stock the common repair materials on our trucks, including paver base, bedding sand, edge restraints, and replacement units, so a teardown-and-rebuild quote usually happens the same day we walk the site.
We are an independent Fort Worth contractor, not a Moen dealer or affiliate. Moen makes faucets and fixtures well, but driveway pavers are a different trade entirely. What matters for your driveway is the base material, the paver unit itself, and how the two are installed together. We carry Belgard and Unilock pavers, both documented name-brand products with manufacturer specs, and we match them to the substrate conditions on your specific Fort Worth lot.
Which Moen Models This Applies To

Moen does not manufacture driveway pavers, so there is no Moen model number to match here. If you have Moen fixtures elsewhere in the home and are now replacing a driveway, you are likely working from the same household mindset: get the right product, installed correctly, with a warranty behind it. That is exactly how we approach paver work.
When we quote a paver driveway in Fort Worth, we match the paver unit to the application. The two most common units we install are 60mm and 80mm thick pavers. The 60mm units work for pedestrian patios and walkways. The 80mm units are what a driveway in Fort Worth needs, because they handle the weight of a full-size pickup without cracking under load. If someone tries to sell you 60mm pavers for a driveway, stop. They will not hold up to a Ford F-150 parked on them every night. That is the kind of compatibility detail we check before the first paver gets set.
OEM versus aftermarket: in the paver world, you buy the paver from the manufacturer (Belgard, Unilock, Techo-Bloc) through a supply yard. Aftermarket equivalents do not really exist the way they do for appliance parts. What does vary is the base, bedding, and joint material. We use crushed limestone base, not sand base, and we compact it in lifts. That matters more than the paver brand for long-term performance in Fort Worth clay soil.
Styles & brands we work with







Signs Your Fort Worth Driveway Pavers Are Failing
- Pavers shifting or separating after rain. This means the edge restraint has failed or was never installed. Fort Worth clay expands and contracts with moisture, and without a solid edge, the pavers walk outward and the joints open up.
- Low spots holding water for more than 24 hours. The base was not compacted properly or has washed out. Standing water on pavers leads to freeze damage, algae, and mosquitos in Fort Worth summers.
- Crumbling or spalling paver surfaces. Some pavers are not rated for freeze-thaw cycles or have absorbed too much water. Fort Worth gets enough cold snaps that surface quality matters.
- Edges sinking into the lawn. The base extends too close to the edge without proper support, and the weight of vehicles pushes the pavers down into soft soil. We see this most often along driveways that were widened without redoing the base.
- Weeds and grass growing through joints every few weeks. Polymeric sand was not used, or it was not installed correctly. Joint sand should lock together and suppress weed growth. If it is washing out, water is getting under the pavers and eroding the base.
Replacement Cost & What’s Included

In Fort Worth, you can expect to pay $7,000 to $18,000 for a full paver driveway installation, including tear-out of the old surface, base prep, pavers, edge restraints, polymeric joint sand, and cleanup. A simple driveway replacement, where we swap existing pavers after fixing the base, runs $5,000 to $14,000. If your pavers have failed but the driveway is mostly intact, we can often repair and re-set sections rather than start from scratch, which usually costs less than a full replacement.
What drives the price? Square footage is the biggest factor. Site drainage is second. If the driveway slopes toward the house, we need to re-grade it so water runs away from the foundation. That is not optional in Fort Worth, where heavy spring rain can undermine a poorly graded driveway in a single season.
| Paver Driveway Service | Typical Fort Worth Price Range |
|---|---|
| Paver Driveway Installation (new) | $7,000 – $18,000 |
| Paver Driveway Replacement | $5,000 – $14,000 |
| Driveway Sealing (paver surface) | $250 – $700 |
| Paver Patio Installation | $3,500 – $11,000 |
Every quote from Bradford Remodeling comes as a written price before any work starts. No numbers that move at the door. The 365-Day Done Right Promise covers all completed paver work in writing: if the work fails inside the first year, we come back and correct it at no charge. That includes shifting pavers, sinking sections, or joint failure.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Here is the honest split. You can absolutely check your edge restraints yourself: walk the perimeter of the driveway and look for plastic or metal edging that has pulled away or lifted. You can also check your joints: if the sand between pavers washes out after a rain, that tells you water is moving where it should not. Those are diagnostics you can do without touching a tool.
Where DIY goes wrong is the base. We see Fort Worth driveways where a homeowner added pavers over the old driveway or poured sand base and called it done. Within two years, the pavers are uneven, water is pooling, and the fix is a full teardown that costs more than doing it right the first time. Paver repair is not dangerous the way gas or electrical is, but it is physically demanding and the equipment, a plate compactor, a demolition saw, a trench digger for edge restraints, is not something most garages keep on hand. If your base has failed, call us at (682) 204-4897 and we will walk the site and tell you exactly what is wrong and what it costs to fix.
Key Takeaways
- Paver driveway installation in Fort Worth runs $7,000 to $18,000; replacement runs $5,000 to $14,000.
- Your driveway pavers must be 80mm thick, never 60mm, to handle vehicle weight.
- Fort Worth clay soil demands crushed limestone base, compacted in lifts, with proper edge restraints.
- Bradford Remodeling writes the price before work starts and backs completed work with a 365-day written guarantee.
- We stock Belgard and Unilock pavers, plus KraftMaid, Cambria, and Silestone materials for other projects around the house.
FAQs
A properly installed paver driveway in Fort Worth lasts 25 to 40 years before the pavers themselves need replacing, assuming the base was built correctly and the drive sees normal residential use. The base, not the paver, is what determines lifespan. If the base was compacted wrong or the drainage was ignored, you will see failure inside five years. Call (682) 204-4897 and we will tell you which one you have.
Yes, if the failure is in a section, not the whole base. We can lift the affected pavers, re-compact the base, add new bedding sand, and re-set them. If the base has washed out across the whole driveway, replacement is the cheaper path in the long run. The only way to know is a site walk, which is free.
Most Fort Worth paver driveway replacements take three to five working days from tear-out to final compaction. Weather can stretch that, since we will not compact soggy base or pour polymeric sand in the rain. We include a written timeline in every quote so you know the schedule before we start.
We stock common repair materials, paver base, bedding sand, edge restraints, and a range of replacement pavers, on our trucks in Fort Worth. For full driveway installations, we order the exact pavers you choose from Belgard or Unilock through our supply yard so the color and lot match. If you need a small repair today, call (682) 204-4897 and we will tell you what is on the truck.
Written by Curtis Lane, Owner, Bradford Remodeling Co Fort Worth, serving Fort Worth and nearby areas.


