Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Toto Fence Installation: The Fort Worth Owner’s Guide
A Toto fence installation in Fort Worth typically runs $3,500 to $9,000 installed, depending on linear footage, fence height, post depth, and gate hardware. We stock Toto-compatible fence components on our trucks, and most residential replacements in Tarrant County take two to three working days once materials are on site. If your fence is leaning, panels are separating at the rails, or a gate stopped latching after the last North Texas windstorm, the failure usually traces back to post-set depth or rail-to-post fastening – not the fence board itself.
Most owners discover the problem the same way: the gate drags on the slab, a section tilts after heavy rain, or a post snaps off at the soil line where the concrete should have held it. Toto fencing uses a specific post profile and rail channel, so the fix is not swapping in whatever the big-box store has on the shelf. Curtis Lane and our crew have pulled enough of these apart across Fort Worth to know exactly what fails first, why it fails, and what it takes to make the repair hold.
Which Toto Models This Applies To
Toto’s residential fence systems come in a handful of series that share post geometry but differ in rail depth and slat profile. The common lines we see in Fort Worth yards are the vertical-slat privacy series, the semi-private scalloped picket series, and the aluminum-frame composite series. Each series uses a Toto-specific post extrusion with an internal rail channel. That channel is the compatibility gotcha: a generic rail from another manufacturer will not seat correctly, even if the outside dimensions look close.
To identify your line, look for the Toto stamp on the post cap or on the inside face of a rail end. If the stamp is weathered off, measure the post face. Most Toto residential posts run 2.5 inches square or 3 inches square, and the rail channel will accept only Toto’s matching rail profile. We carry OEM Toto rails, posts, post caps, and gate frame kits, plus quality aftermarket options from manufacturers who machine to Toto’s exact channel spec. For anything under a full year old, we recommend OEM so the manufacturer warranty stays intact. For older fences, a properly spec’d aftermarket rail often saves $8 to $15 per rail section without sacrificing fit.
We are an independent Fort Worth contractor, not affiliated with Toto. That matters because we service what we install and we specify parts against the original profile, not against whatever is easiest to order.
Styles & brands we work with
Signs Your Toto Fence Installation Is Failing
- Post leans at the soil line but the post is not cracked. The concrete footer was set too shallow for North Texas clay. Fort Worth soil expands and contracts hard through wet and dry cycles, and a 24-inch post hole will heave. We set posts at 30 to 36 inches minimum and use a concrete collar wider than the hole to fight the heave.
- Rail ends have pulled out of the post channel. Toto rails sit inside the channel and lock with a set screw or clip. Over time the clip corrodes, or the rail was cut a half-inch short at original install. The fix is a new rail cut to exact length and a fresh stainless clip.
- Gate sags and drags the ground on the latch side. The gate frame was undersized for the gate width or the hinge post has begun to lean. We rebuild with Toto’s heavier gate frame and add a diagonal cable tensioner so the gate stays square.
- Slats rattle inside the rails in any wind over 15 mph. Toto slats ship with plastic glides that seat them inside the rail. Those glides break down fast in direct Texas sun and the slats start knocking. We replace with new glides or run a flat aluminum stiffener bar, depending on the series.
- Bottom rail has corroded through at the post connection. Aluminum handles Fort Worth fine, but steel-backed Toto rails in low spots that hold water will rot. We replace with aluminum rail and slope the post drainage so water can’t pool.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Fort Worth, a full Toto fence replacement on a standard 60- to 80-foot backyard runs $3,500 to $9,000 installed. On the low end, that covers reusing existing concrete footings where they are still sound, swapping rails, slats, and hardware, and resetting only the failed posts. On the high end, that covers full tear-out, all new posts set to our 30- to 36-inch standard, new rails, new slats, new gate frame, and haul-off of the old material.
The main cost drivers are linear footage, fence height (6-foot runs about 20% more than 4-foot), gate count, and whether we’re working around pool equipment or uneven grade. Every quote from Bradford Remodeling Co Fort Worth is a written, line-item price before any work starts. You’ll see the exact post count, rail length, slat count, and labor cost. That price does not move at the door. And every completed fence carries our 365-Day Done Right Promise: if the work fails inside a year, we come back and fix it at no charge. Written guarantee in your hand at close-out.
DIY or Call Us?
You can safely inspect a Toto fence. Walk the line, push gently on each post top, check rail ends inside the channels, and look for slat glides that have crumbled out. That level of diagnosis tells you the scope and keeps a contractor honest. What you should not do is dig and reset posts yourself on a property line without checking the locate markings, and you should not try to re-tension a gate cable under load. Both go wrong in ways that cost more than the service call.
The real line is concrete work. If a post is still solid in the ground and only the rail or slats have failed, a careful owner with a saw and a drill can swap those parts. If the post itself is moving, the footing has to come out, the hole has to go deeper, and the new post has to be aligned on the same plane as the rest of the line. We fix a lot of homeowner resets where the post was set plumb but not in line with the rail run. Straight scope, firm price, no surprises at final walkthrough. Call (682) 204-4897 and we’ll tell you whether it’s a parts swap or a reset before you spend a dollar.
FAQs
Expect 15 to 22 years from the aluminum components in Fort Worth’s climate, with the caveat that posts set in heavy clay soil may need resetting sooner if the original install used shallow footings. The aluminum itself doesn’t rot or rust here; what fails first is almost always the slat glides and rail clips from UV exposure, then the post footings from soil movement. Call (682) 204-4897 for an on-site assessment.
Yes, if the post itself is not cracked and the lean is from a shallow or failed concrete collar. We excavate alongside the post, pack and brace it true to the line, and pour a new collar to our depth standard. This repair typically runs a few hundred dollars per post and can be done same-day in most Fort Worth yards. Call (682) 204-4897 and we’ll tell you if your posts are candidates.
Most standard Fort Worth residential replacements run two to three working days from old-fence removal to final gate adjustment. That includes concrete cure time on the new posts. If we’re only swapping rails and slats on sound posts, it’s often done in a single day. We never rush the post cure, because that’s the part that determines whether the fence is still straight in ten years.
We keep Toto-compatible posts, rails, clips, glides, and gate frame hardware stocked on our trucks for the series we service most often in Fort Worth. For less common series or exact OEM replacement where a warranty is in play, we order direct and typically have the parts within three to five business days. Call (682) 204-4897 and we’ll confirm your series before you spend anything.
Written by Curtis Lane, Owner, Bradford Remodeling Co Fort Worth at Bradford Remodeling Co Fort Worth, serving Fort Worth and nearby areas.
