CWS Bathroom Remodeling Nationwide

CWS Bathroom Remodeling: The Fort Worth Owner’s Guide

A full CWS bathroom remodel in Fort Worth runs $9,000 to $28,000 installed, and that spread comes down to square footage, how far you move plumbing, and the finish tier you pick. We stock and install CWS-compatible vanities, shower bases, and fixture sets, and we can usually have your materials staged within five to seven business days. Most Fort Worth homeowners call us because a CWS component has failed or the original install was never done right: a shower pan that’s cracked at the drain collar, a vanity that’s delaminating at the toe kick, or a tub surround that’s pulling away from the substrate and letting water run behind the wall.

Call (682) 204-4897

Key Takeaways

• Installed CWS bathroom remodels in Fort Worth range from $9,000 to $28,000 depending on scope and finishes.
• We carry CWS-compatible shower bases, vanities, surrounds, and fixture plates, with OEM and proven aftermarket options.
• Every job gets a written price before work starts and the 365-Day Done Right Promise in writing at close.
• Water intrusion behind a CWS surround is the failure we see most in Fort Worth’s humidity swings.

Which CWS Models This Applies To

CWS builds bathroom components across several lines, and the compatibility gotcha is that their shower bases and surrounds changed drain-center dimensions between generations. An older CWS acrylic base often has a 14-inch rough-in from the back wall to the drain center; newer modular pans run 16 inches. If you order a new pan without checking that measurement, the drain won’t line up and you’re cutting into the subfloor to make it work. That’s a $400 to $900 mistake we see on at least a few Fort Worth jobs every year.

The OEM-versus-aftermarket question depends on what failed. For CWS shower bases and surrounds, the OEM part is the safest match, but it’s often backordered. We keep a roster of aftermarket bases from manufacturers whose molds match CWS drain-center specs within an eighth of an inch. For vanities, CWS uses standard 21-inch-deep, 32-inch-high cabinet boxes, which means a quality aftermarket cabinet from KraftMaid or Wellborn drops in without modifying the rough-in. Bradford Remodeling Co Fort Worth is an independent service provider, not affiliated with CWS, so when we recommend an aftermarket part, we’re doing it because it fits and it holds, not because anyone’s paying us to say so.

Signs Your CWS Bathroom Remodeling Is Failing

• Caulk lines pulling away from the tub or shower base. This usually means the surround or base is flexing, which in turn means the original install didn’t shim the unit solidly against the studs. Water gets behind the flange and rots the bottom plate of the wall.
• A soft spot in the floor within 12 inches of the shower curb. In Fort Worth, we see this after big humidity swings followed by dry spells. The pan was likely nicked during install or the drain collar wasn’t sealed with silicone before the strainer went on. By the time you feel it from above, the subfloor is already losing structure.
• The vanity cabinet doors won’t stay shut, or they scrape at the top corner. That’s the cabinet box racking, which happens when CWS vanities sit on an uneven slab and nobody shimmed the base before setting the top. It’s not a hinge problem; it’s a substrate problem.
• Discoloration or bubbling at the bottom of the surround panels. This is water wicking up from the seam where the surround meets the base. CWS surrounds rely on a factory lap joint that works only if the base is perfectly level. Half a bubble on a 30-inch run is enough to break that seal.
• Drainage that’s slowed to a crawl even after snaking the line. On older CWS shower pans, the drain body is a two-piece compression fitting that separates over time. Snaking does nothing because the blockage isn’t in the pipe; the assembly has backed itself off and hair is gathering in the gap.

Replacement Cost & What’s Included

In Fort Worth, a CWS shower base replacement runs $3,000 to $8,500 installed, including demolition of the old pan, subfloor inspection and repair where necessary, setting the new base, and re-sealing the surround. A full CWS bathroom remodel, where we’re pulling the tub, re-doing the surround, setting a new base, and installing a new vanity, lands between $9,000 and $28,000. The spread is driven by whether we’re moving the toilet or shower drain, whether the subfloor needs sectioning out, and what tier of fixtures you choose. We write the line items out for you: parts, labor, demo, disposal, tile if applicable, and the exact finish spec, so there’s no mystery number at the end.

Every CWS bathroom remodel we do in Fort Worth carries the 365-Day Done Right Promise. That means a written guarantee for a full year from the day the job closes: if the work fails inside that window, Bradford Remodeling Co Fort Worth comes back and corrects it at no charge. You get that in writing before we start, signed at walkthrough when the site is cleaned and the scope is documented.

FAQs