Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ES Windows Driveway & Pavers: The Fort Worth Owner’s Guide
If you’re holding a failed ES Windows driveway or paver component, we stock and install compatible replacements across Fort Worth, with most driveway and paver work priced between $4,500 and $18,000 installed. We keep common ES Windows hardware and related paver components on our trucks, so a single visit usually gets the job squared away. The way most Fort Worth homeowners discover this problem: a paver shifts out of plane after a heavy rain, a driveway edge crumbles at the curb line, or a window well drain backs up and sends water under the border course. You call around, get three different stories, and nobody will commit to a written number. That’s the exact situation this page is built to fix.
Which ES Windows Models This Applies To
ES Windows driveway and paver applications fall into two broad groups. First, the window well surrounds and basement egress wells that ES Windows products commonly border: these use a compact paver block, usually 60mm trapezoid or 80mm square, set on a compacted aggregate base with a polymer-sand joint. Second, the full driveway and paver runs on properties where ES Windows units are installed above grade, where the paving ties into the window line. The compatibility gotcha most people miss: ES window well surrounds are dimensioned to the well’s flange, not to the paver. You can’t drop a generic big-box paver into an ES well surround and expect the border course to seat. We match the unit to the well’s actual throat measurement and the existing bond pattern before we order or pull anything from the truck.
When a part fails, identify what you have before you buy. Look for a stamp on the underside of the paver or the well flange: ES Windows parts carry a two-letter series code (usually EW followed by a number) plus a dimension stamp in millimeters. If the stamp is gone, we measure the throat width and the well depth on site. For the OEM-versus-aftermarket call, we use genuine ES Windows hardware where the flanged connection matters, and quality Texas-sourced paver equivalents where the block is purely structural. An off-brand flange that’s 2mm off will bind the window frame and void the window’s own warranty. That’s the kind of mistake that costs a Fort Worth homeowner twice.
Styles & brands we work with
Signs Your ES Windows Driveway & Pavers Is Failing
- Paver rock or wobble underfoot near the window well. The base has washed out or settled. In Fort Worth’s clay soil, this happens faster than homeowners expect: the clay shrinks in summer, swells in spring, and the pavers lose support. The fix involves recompacting the base, not just resetting the paver.
- Border course pulling away from the window flange. The edge restraint failed or was never installed. You’ll see a widening gap between the paver edge and the ES window frame, which lets water in behind the well and undermines the whole run.
- Water pooling against the window well after rain. The paver slope has flattened out. ES window surrounds need a 1/4-inch-per-foot fall away from the window. When the grade goes flat, water sits at the flange and works its way into the wall.
- Driveway edge spalling or broken pavers at the curb line. Vehicle weight over a weak base, often combined with no concrete header at the street edge. We see this constantly on Fort Worth’s east side, where older driveways were poured thin and never reinforced.
- Hairline cracks running through multiple pavers in a line. This is a structural crack, not a block failure. It means the base is moving. Replacing pavers alone won’t stop it; the repair has to address the base movement first.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Fort Worth, a paver driveway installation runs $7,000 to $18,000 depending on square footage, base depth, and access. A concrete driveway runs $4,500 to $12,000. Driveway replacement sits between $5,000 and $14,000, and driveway sealing runs $250 to $700. For ES Windows window well surrounds specifically, the paver work typically falls in the lower end of the paver patio range, $3,500 to $11,000, because the area is compact but the detail work is exacting. What drives the range: soil conditions (Fort Worth clay needs a deeper compacted base than sandier soil), demo and haul-off if old paving has to come out, and whether we’re matching an existing bond pattern or starting fresh. Every quote includes the parts, labor, base prep, jointing material, and a written line-item scope. No number moves at the door. The work carries our 365-Day Done Right Promise: if it fails inside a year, we come back and correct it at no charge.
DIY or Call Us?
Here’s the honest split. You can safely inspect the surface: check for loose edge blocks, look at the slope, and watch where water sits after a rain. What you should not do yourself is lift a window well pavers course and try to re-set it. The window well carries soil pressure against the ES window frame, and a badly reset course shifts that loading onto the frame itself. We’ve repaired jobs where a homeowner reset the border pavers tight against the flange, the clay moved in the next wet cycle, and the window frame buckled inward. That repair tripled the original cost. If you’re in Fort Worth and the pavers are moving, call us at (682) 204-4897. We’ll walk the site, give you a written price, and tell you exactly what’s failing and why.
FAQs
A properly installed paver driveway over a compacted aggregate base lasts 25 to 30 years in this climate, but the Fort Worth clay cuts into that number. Expect 15 to 20 years before you need a base lift and re-set on the border courses. Call (682) 204-4897 and we’ll look at what you have and give you a straight answer on remaining life.
Yes, in most cases. If the pavers are intact and only the base or edge restraint has failed, we lift the affected course, recompact the base, reset the border, and re-joint with polymer sand. Full replacement is only needed when the blocks themselves are cracked through or the pattern can’t be matched. Call (682) 204-4897 for an exact assessment.
A window well surround repair is usually a one-day job. A full driveway replacement takes two to four days depending on demo, base work, and paver count, with concrete driveways adding curing time before vehicle use. We’ll put the schedule and the written price in your hand before any work starts.
We stock the common ES Windows border blocks, flange hardware, aggregate base material, and polymer sand, plus a full range of paver units sized to match the common Fort Worth bond patterns. Unusual series codes may take a day or two to source. A live person answers at (682) 204-4897, and we’ll check stock while you’re on the phone.
Straight scope, firm price, no surprises at final walkthrough. If your ES Windows driveway or pavers are failing and you want a written number instead of another vague promise, call Curtis Lane and the Bradford Remodeling crew at (682) 204-4897. We’ll schedule the free estimate, walk the site with you, and put every number on paper before any tool comes off the truck. That’s The Garrison Standard, and it’s been our way of working since 2004.
Written by Curtis Lane, Owner, Bradford Remodeling Co Fort Worth at Bradford Remodeling Co Fort Worth, serving Fort Worth and nearby areas.
