Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ActiveYards Fence Installation: The Fort Worth Owner’s Guide
A full ActiveYards fence installation in Fort Worth typically runs $3,500 to $9,000 for a standard residential yard, depending on linear footage, gate count, and whether we’re pulling old posts or setting new ones. That’s the installed number, not just the panels. We stock ActiveYards-compatible hardware and posts on the truck, and we can usually get a new fence stood up inside a week once the scope is signed.
Most Fort Worth homeowners call us because a section blew over in a spring storm, or the posts are leaning after a few seasons of clay soil shifting through wet-dry cycles. Maybe the gate drags now, or a panel worked loose from its bracket. ActiveYards builds a clean aluminum and vinyl system, but the installation is only as good as what’s under it: the posts, the concrete, and the hardware alignment. That’s where failures start, and that’s what this page is about.
Which ActiveYards Models This Applies To
We install and repair the full ActiveYards residential line, which in Fort Worth mostly means aluminum fence and vinyl fence builds. The common product families are the ActiveYards aluminum series, which runs from lighter residential grades up to commercial-weight extrusions, and the vinyl privacy and semi-privacy panels sold under the ActiveYards brand. The compatibility catch: ActiveYards aluminum panels use a punched-post system with stainless steel screws that seat into routed channels, not universal brackets from the hardware aisle. Matching a Universal bracket to an ActiveYards rail doesn’t hold, and we’ve pulled more than one DIY repair apart to redo it properly.
To identify your specific line, look for a small foil label or embossed code on the inside of a rail, usually near an end cap. Take a photo of it. If the label’s gone, measure the rail cross-section with a tape: ActiveYards aluminum rails typically run 1-5/8 to 2 inches tall depending on the series, and the post wall thickness tells us whether it’s residential or commercial grade. Vinyl panels are easier, because the picket profile and top-rail shape are distinct across their privacy and semi-privacy lines.
On OEM versus aftermarket: for ActiveYards aluminum, we recommend OEM panels and posts because the powder coat and punched-hole geometry are matched, and mixing in a Universer-style aftermarket post changes the screw alignment and usually leaves a visible seam at the gate. For vinyl, aftermarket vertical posts and rails from reputable extrusion houses can work if the wall thickness matches, but we’ll tell you in writing if we think it’s a false economy. Bradford Remodeling Co Fort Worth is an independent installer, not affiliated with ActiveYards; we just know how the system goes together.
Styles & brands we work with
Signs Your ActiveYards Fence Installation Is Failing
- Posts leaning or out of plumb: This is almost always a footing problem, not a panel problem. Fort Worth’s clay soil expands when wet and contracts bone-dry, and a shallow or undersized footing gets worked loose in two seasons. The post itself is usually fine; the concrete pour under it wasn’t deep enough.
- Gate sagging or dragging at the latch: On ActiveYards aluminum, the hinge screws into a riveted post insert, and once that insert strips or loosens, the gate frames fight itself. You can shim the latch, but the hinge anchor is the real cause.
- Panels rattling in the wind at the post connection: The stainless screws that seat ActiveYards rails into the punched posts can back out over time, especially on the prevailing gust side of a Fort Worth lot. Left loose, the rail end chews the powder coat off the post.
- White oxidation or bubbling on aluminum rails: ActiveYards maintains a strong powder coat, but where a screw head scratches through to bare aluminum, you’ll get white fuzz at the contact point. It’s cosmetic at first, then it’s a corrosion point that weakens the connection over years.
- Vinyl panels pulling vertically apart at the bottom rail: Vinyl expands and contracts with temperature, and a run installed too tight without room to move will pop a picket out of its bottom rail pocket in July, then pinch it back in January. It repeats until the pocket cracks.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For a full ActiveYards fence installation in Fort Worth, plan on $3,500 to $9,000 installed. A straight 150-foot run of ActiveYards aluminum with a single gate and 2-foot-deep footings typically lands near the $4,000 mark. Push to 300 feet with corrosion-resistant hardware, two gates, and old-fence removal, and you’re looking at $7,500 to $9,000. Vinyl privacy runs a little higher on material but similar on labor.
What drives the spread: linear feet, how many gates, whether we remove and haul the old fence, whether the old posts were set in concrete that now has to come out, and access to the post line. Trees, property-line pins, and slope all add time.
Every quote is a written line-item price before work starts. You’ll see the panel line, post count, concrete for footings, gate hardware, and labor broken out separately. No numbers move at the door. Bradford Remodeling Co Fort Worth holds to The Garrison Standard: a written price, a written scope, and a written 365-Day Done Right Promise on the completed install. If the work fails inside that year, we come back and correct it at no charge. We also carry background-checked, uniformed technicians, and a live person answers the phone 24/7. Curtis Lane reads the job site before the quote, which means our scopes don’t grow legs mid-project.
On top of our own guarantee, we can register your ActiveYards panels with the manufacturer so their material warranty is on file. We install from a documented roster of name-brand materials, and ActiveYards is one we keep hardware for on the truck; we also work with KraftMaid, Cambria, and Silestone in the remodel side of the house, among others.
DIY or Call Us?
A fence installation isn’t a high-tension spring or a live panel; the dangerous part on a fence job is what’s in the ground, not what’s on the rail. But the honest truth from our perspective: if you’re posting holes by hand in Fort Worth clay, you’ll be out there for a weekend and the posts still won’t hold plumb in two years. We use an auger and set footings below the frost line with proper drainage at the bottom, and that’s the difference between a fence that looks straight in April and one that’s leaning by the next wet spring.
What an owner can safely do: check the hinge screws on a sagging gate, tighten the rail screws on a rattling panel, and mark any post that’s lost its plumb so you can watch it through a rain cycle. What goes wrong with DIY: mixing aftermarket hardware into the ActiveYards punched-post system, setting posts in concrete that doesn’t extend past the clay band, and hanging a gate before the concrete has cured. If you’d rather not risk a fence that goes out of level before the warranty is even registered, call us at (682) 204-4897 and we’ll put the numbers in writing.
FAQs
An ActiveYards aluminum fence with properly set footings will give you 25 to 30 years in Fort Worth; vinyl runs closer to 20 before the Texas UV starts to chalk the surface. The panels outlast the posts in most of the failures we see. The footings and hardware are what time attacks first. Call (682) 204-4897 and we’ll put our a year-long guarantee on the whole install, not just the materials.
If the posts are straight and the rail screws hold, we can swap individual ActiveYards panels and gate hardware. If the posts are moving, a patch job just remounts the problem. We’ll tell you which camp you’re in before we quote anything, and the fix is spelled out in the written scope. For an exact look, call (682) 204-4897 to schedule a free estimate.
Most Fort Worth residential installs run one to three working days from hole-dig to final gate adjustment, weather permitting. Concrete footings need a day to cure before we stress the post line with the gate. We’ll tell you the schedule in writing before we start, and it holds. Call (682) 204-4897 for current scheduling.
We keep ActiveYards-compatible panels, posts, punched-rail hardware, and gate kits stocked for common residential profiles in our Fort Worth trucks. We stock ActiveYards-specific stainless rail screws and gate hinge inserts so we’re not ordering from the hardware aisle mid-job. If your specific series isn’t on the truck, we can typically source it from our vendor network inside a week. Call (682) 204-4897 with your panel label and we’ll confirm before you lift a finger.
Written by Curtis Lane, Owner, Bradford Remodeling Co Fort Worth at Bradford Remodeling Co Fort Worth, serving Fort Worth and nearby areas.
