Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Belgard Home Additions & ADU: The Fort Worth Owner’s Guide
A Belgard home addition or ADU in Fort Worth typically runs $45,000 to $130,000 installed, depending on square footage, foundation work, and how much of the Belgard hardscape system gets tied into the build. We stock and install the full Belgard paver and wall lineup for additions and accessory dwelling units, and we can usually have materials on your site within 5 to 7 business days after the written scope is signed. Most homeowners discover they need Belgard-specific work when an existing paver patio, retaining wall, or walkway that was supposed to tie into the new addition doesn’t line up cleanly, or when the original installer used a mixed-lot blend that faded at different rates under the Texas sun. By the time we get the call, the homeowner has usually lived with a mismatched transition for a season or two and wants it done right before the structure goes up.
Which Belgard Models This Applies To
When we’re adding square footage or building an ADU in Fort Worth, the Belgard components that matter most are the pavers, retaining wall blocks, and permeable pavers that define the outdoor transitions around the new structure. Belgard’s product lines that show up most often in our Fort Worth projects are the Cambridge Cobble, Mega-Arbel, Lafitt Grana Slab, and Melville Wall systems. Each one has different joint widths, thickness tolerances, and recommended base depths. A Cambridge Cobble paver is 60mm thick and locks on a 1/8-inch joint, while a Lafitt Grana Slab sits at 40mm and wants a tighter, sometimes mortared set. If you’re matching an existing Belgard installation, you’ll find the series name stamped on the bottom of the paver on most runs, or on the original invoice from the landscape supplier. That series name matters more than the color, because two colors in the same series will blend acceptably, but two series will not share edge profiles.
On the OEM versus aftermarket question for Belgard, we’re direct about this: there is no meaningful aftermarket for Belgard pavers and wall blocks. Belgard is the manufacturer, and the color blends, aggregate mixes, and face textures are proprietary to their production lots. What you will see in Fort Worth are supply houses offering discontinued colors or older series at a discount. Sometimes that works if the lot is a true dead match. More often, the color shift between lots is visible the day it’s installed and it gets worse with sun exposure. We order current Belgard production and match the lot number on the pallets before we schedule the install. That discipline is part of The Garrison Standard, and it’s why we write the series name and lot number into your scope before a single block gets laid.
Bradford Remodeling Co Fort Worth is an independent remodeling contractor. We are not affiliated with or endorsed by Belgard. We work with their products because the specs are documented and the manufacturer stands behind their warranty, which aligns with how we do business.
Styles & brands we work with
Signs Your Belgard Home Additions & ADU Is Failing
- Joint sand is migrating after every rain. Fort Worth’s clay soil expands and contracts hard between wet and dry seasons. If the paver base was under-prepared, the sand washes out through the joints and the pavers start to “creep” toward the edges. The fix is a re-compaction and re-sanding, and sometimes a deeper base excavation if the original installer shorted it.
- Edge pavers are dropping at the transition to the slab. We see this on additions where the concrete crew poured the slab first and the paver crew came in later without a proper edge restraint. The outside course of pavers loses lateral support and sinks a quarter-inch or more. It looks like a minor lip, but that lip will chip paver corners and become a trip hazard at the door threshold.
- Retaining wall blocks are leaning out at the face. Belgard wall systems need a buried course and proper geogrid on anything over 24 inches in Fort Worth. Without it, the clay soil’s lateral pressure pushes the wall forward over time. You’ll see a visible batter change, or gaps opening between courses. This is a structural issue, not a cosmetic one.
- Color fading is uneven across the new work. Texas UV is hard on paver color. If the addition’s new pavers were sourced from a different lot than the original patio, the color difference becomes obvious within two summers. Belgard’s color stabilizers slow this, but they don’t make mismatched lots match.
- Permeable pavers are ponding water. Belgard’s permeable systems are designed to drain through the joints. If the install crew used the wrong aggregate fill or never opened the weep zones, the surface holds water and becomes a mosquito ground in Fort Worth’s warm months. We find this on ADU entries where the paver area was treated like a standard patio instead of a drainage surface.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For a Belgard-focused home addition or ADU project in Fort Worth, you’re looking at $45,000 to $130,000 as the installed range. The spread is driven primarily by conditioned square footage, whether we’re tying into the existing foundation or pouring new, and how much Belgard hardscape gets integrated into the plan. A simple 400-square-foot addition with a small Cambridge Cobble entry patio lands near the bottom of that range. An 800-square-foot ADU with a full paver driveway, a Melville retaining wall, and permeable pavers at the entry will push toward the top.
What’s included in our number: a written line-item scope before any work starts, the Belgard materials with lot numbers documented, site prep and base work, the build itself, and a final walkthrough where we hand you the signed guarantee. What’s not included: hidden change orders. Curtis Lane reads the job site before he reads the quote, which means our scopes don’t grow legs mid-project. If we find a problem behind the wall or under the slab, we bring it to you in writing with a fixed number, not a surprise at the door. Every completed addition or ADU carries the 365-Day Done Right Promise in writing: if the work fails inside that year, we come back and correct it at no charge.
DIY or Call Us?
There are a few things you can safely do yourself before we arrive. You can check the series name stamped on your existing Belgard pavers. You can photograph the transitions and measure the visible drop at the slab edge. You can pull your original landscape invoice if you have it. What you shouldn’t do is attempt to lift and reset pavers, re-level a retaining wall, or re-grade a base by hand. The stakes are lower than a garage spring, but the failure mode is the same: a job that looks fine for six months, then shifts with the first hard rain, and you’re back where you started with a rougher surface and a shorter fuse. Fort Worth’s clay soil punishes shortcuts. We’ve pulled out paver work that was installed by a handyman three times before we got the call, and every layer was wrong in a different way.
If you want the number, call (682) 204-4897. We’ll put a written price in your hands before the first tool comes off the truck.
FAQs
Belgard pavers and wall blocks typically last 25 to 40 years in Fort Worth when installed on a properly compacted base with edge restraints and correct drainage. The pavers themselves rarely fail; the base does. We warranty our installation for a full year under the 365-Day Done Right Promise, and most of what we correct inside that window is base settlement, not paver failure. Call (682) 204-4897 to have us inspect your existing Belgard installation before you add onto it.
In many cases we can repair a section, especially if the failing area is an edge course or a transition zone. The limiting factor is lot matching: Belgard color blends shift between production runs, so a patch may look inconsistent even when the series matches exactly. We’ll tell you straight if a repair won’t look right. Call (682) 204-4897 for an assessment and a written fix-versus-replace recommendation.
A typical Belgard-integrated addition in Fort Worth runs 8 to 16 weeks from the day we pull the permit, depending on foundation conditions and scope. The paver and wall portions usually install in 3 to 8 working days once the structure is up. We write the schedule into your scope, and we don’t leave the site until the work is squared away. Call (682) 204-4897 to get a written timeline for your specific project.
We don’t warehouse Belgard pavers and wall blocks on-site, because Fort Worth’s heat can shift lot color in stored pallets and we won’t install sun-aged material next to fresh. We order from Belgard’s current production runs for every job, with the lot number documented in your scope, and materials typically arrive within 5 to 7 business days. We also provide name-brand materials across our remodeling work, including KraftMaid, Cambria, and Silestone, where the same lot-documentation standard applies. Call (682) 204-4897 to discuss your project and get a written materials timeline.
Straight scope, firm price, no surprises at final walkthrough. That’s how we run every addition and ADU job in Fort Worth, and it’s how we’d run yours.
Written by Curtis Lane, Owner, Bradford Remodeling Co Fort Worth at Bradford Remodeling Co Fort Worth, serving Fort Worth and nearby areas.
