Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tremron Bathroom Remodeling: The Fort Worth Owner’s Guide
A full Tremron bathroom remodel in Fort Worth typically runs $9,000 to $28,000 installed, with most master baths landing between $14,000 and $22,000 depending on square footage and what’s behind the walls. We stock Tremron-compatible tile, trim, and substrate materials locally, and our crew can match your existing Tremron layout, grout color, and edge profile so the new work doesn’t look like an afterthought. Most homeowners call us when a Tremron tile or surround has cracked, a corner bead has popped, or water has found its way behind the tub flange and started working on the drywall.
Which Tremron Models This Applies To
Tremron manufactures hardscape and masonry products, but many Fort Worth bathrooms feature Tremron tile lines, pre-cast shower surrounds, and stone vanity tops from their catalog. The compatibility issue we see most often: Tremron’s cast stone edges are thicker than standard ceramic, which means a big-box tile blade or a handyman’s wet saw will chip the profile before the first cut is done. We run a dedicated masonry blade for all Tremron cuts, and we match the grout joint width to the original spec – usually 1/8 inch for their interior lines, sometimes 3/16 inch on their larger format pieces. Check the back of any loose tile for a raised Tremron stamp or a molded CORE code. That tells us which series we’re matching. If you don’t have a loose tile, a clear photo of the wall with a tape measure held against the grout line is usually enough for us to identify it.
One more thing worth knowing: Tremron’s indoor tile lines don’t share the same frost-resistance spec as their outdoor pavers. A homeowner who salvaged matching tile from a patio project and used it in a shower stall will see surface spalling within two or three seasons. Fort Worth’s hard water accelerates the problem. That’s the kind of thing we flag before we quote, not after we open the wall.
Styles & brands we work with
Signs Your Tremron Bathroom Remodeling Is Failing
- Grout is crumbling or turning chalky at the shower floor. Water has penetrated the grout and is sitting in the mud bed underneath. In Fort Worth’s clay-heavy soil, even minor slab movement from summer drought cycles makes this worse.
- Tiles sound hollow when tapped with a coin. The thinset bond has broken, usually from moisture or from an installer who didn’t back-butter the tile. Once two or three tiles go hollow in a wet area, the substrate behind them is usually compromised.
- A musty smell that never quite leaves the bathroom. Mold is growing behind the tile or inside the drywall cavity. Cleaning the surface won’t stop it. The affected sheetrock has to come out.
- Grout joints are cracking in a straight line across the wall. That’s not a grout problem. That’s substrate movement, often a seam in the backer board that wasn’t taped or a stud that’s shifted. The fix is behind the tile, not on top of it.
- Corner joints where the tub meets the surround are separating or stained. The silicone bead has failed or was never applied correctly. Water travels down behind the tub flange and into the subfloor. By the time you see the stain, the damage underneath is already done.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
A straight Tremron tile replacement job, where the substrate is intact and we’re swapping like-for-like materials, starts around $3,000 in Fort Worth. A full gut-and-rebuild of a Tremron-surrounded bathroom with new waterproofing, new substrate that may be required by current code, new tile or surround, and a new shower valve lands between $9,000 and $28,000. What drives the range:
| Scope | Typical Fort Worth Installed Cost |
|---|---|
| Partial Tremron tile replacement, substrate intact | $3,000 – $6,500 |
| Shower floor and pan replacement with Tremron-compatible tile | $4,500 – $9,000 |
| Full tremron shower rebuild, including waterproofing and rough-in | $9,000 – $16,000 |
| Complete tremron bathroom remodel, floor-to-ceiling | $16,000 – $28,000 |
Every quote from Bradford Remodeling Co Fort Worth is a written price before any work starts. No numbers move at the door. That price includes materials, labor, demolition, haul-away, and the 365-Day Done Right Promise: if the work fails inside a year, we come back and correct it at no charge. Curtis Lane signs every scope himself.
DIY or Call Us?
If you have a loose, hollow tile above the water line, you can remove it, inspect the thinset behind it, and take a moisture reading with a $40 meter from any home store. If the substrate feels dry and solid, regluing a single tile is a reasonable afternoon project. What you shouldn’t touch is anything below the water line or behind a tub flange. Once you open a shower wall in Fort Worth, you may find water-damaged framing, and you may open a can of worms that a homeowner’s insurance adjuster won’t like the look of. Wet-area demolition without a proper containment plan sends mold spores through the house. That’s a job for a crew that pulls permits and knows what the City of Fort Worth inspector expects to see. Call (682) 204-4897 and we’ll tell you honestly whether it’s a tile swap or a tear-out. The estimate is free either way.
FAQs
A correctly installed Tremron bathroom with proper waterproofing should last 20 to 30 years before you’re looking at meaningful work again, though grout and silicone are maintenance items you’ll refresh every few years. In Fort Worth’s climate, the bigger killer is the freeze-thaw cycle around exterior walls and occasional slab movement from our clay soils. If the substrate wasn’t installed correctly the first time, you’ll know within two to three years. Call (682) 204-4897 for an honest assessment of what you’ve got.
Yes, if the tile is above the water line, the substrate behind it is dry and sound, and we can source a matching tile from your Tremron series or our supplier network. If the crack runs through the grout lines or sits inside the shower’s wet zone, replacing one tile won’t solve the underlying water problem. We’ll tell you straight which category we think you’re in before we quote you a dime.
A full tear-out and rebuild typically takes 10 to 15 working days in Fort Worth, depending on whether we find water damage behind the walls and whether the city has to inspect the rough-in. A partial tile replacement can often be done in two to three days. We set a written start date and give you the scope on paper before day one, so you know exactly what’s happening every week.
We keep the high-turnover items in our Fort Worth shop: trim pieces, corner bead, grout in standard colors, and compatible thinset and waterproofing. For full tile runs, we source from Tremron’s Texas distribution network and our local Fort Worth suppliers, which usually puts materials in our hands within a week. If your project is a straight replacement, you’re not waiting on a freight truck from out of state.
No. The price on your written quote is the price you pay, unless we both agree in writing to a change in scope because something was uncovered that neither of us could see before demolition. No surprises at final walkthrough. That’s not a slogan here; it’s how Curtis Lane runs every job. Call (682) 204-4897 and put us to the test.
Written by Curtis Lane, Owner, Bradford Remodeling Co Fort Worth at Bradford Remodeling Co Fort Worth, serving Fort Worth and nearby areas.
