Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Quikrete Home Additions & ADU: The Fort Worth Owner’s Guide
Quikrete home additions and ADU builds in Fort Worth typically run $45,000 to $130,000 installed, depending on foundation depth, square footage, and whether you’re tying into existing slab or pouring new footings. We stock Quikrete-compatible concrete mixes, rebar, and anchor hardware on our trucks for foundation pours, stem walls, and post-base work. Most Fort Worth owners call us because their existing Quikrete foundation or slab has cracked, shifted, or settled to the point where the planned addition or ADU can’t sit square on it.
The typical discovery goes like this: you’re ready to pull the trigger on a backyard ADU or a bump-out, and the engineer or inspector flags the existing Quikrete slab. Maybe it’s a 1/4-inch crack running the full width, maybe the soil underneath has washed out after a hard Texas summer storm. Either way, the concrete that was supposed to support the new structure won’t pass inspection as-is. That’s the call we get most often.
Which Quikrete Models This Applies To
Quikrete doesn’t make a single “addition” product. What you’re dealing with is a mix selection problem. For Fort Worth home additions and ADUs, the relevant Quikrete products are 5000 PSI concrete mix, high-strength countertop mix for any custom concrete sills, and Quikrete’s crack-resistant mix where soil movement is a known issue. The bag label matters more than the brand name here: you need to match the PSI rating to what your structural drawings call out.
The compatibility gotcha most homeowners miss is this: Quikrete 4000 PSI mix is fine for sidewalks and small sheds, but a permit-bearing ADU foundation in Fort Worth generally requires 3500 PSI minimum after 28 days of cure, and most engineers spec 4000 PSI or higher for load-bearing footings. We’ve seen scopes fall apart at inspection because someone used the wrong bag off the pallet. Check the drawings first, match the bag second. For most of our addition and ADU work, we use OEM Quikrete bags supplied by the homeowner or direct-ordered, and we have approved aftermarket equivalents that meet the same PSI spec when Quikrete isn’t available locally in the needed quantity.
Fort Worth soil is the other factor. The clay-heavy ground on the south side and near the Trinity River expands and contracts more than the sandy loam further north. That movement is exactly why we specify crack-resistant Quikrete mix for stem walls and slab edges in this market, and why we pour control joints at tighter intervals than you’d see in a drier climate.
Styles & brands we work with
Signs Your Quikrete Home Additions & ADU Is Failing
- Hairline cracks running diagonal across the slab. This usually means differential settling under one corner of the existing concrete. The addition or ADU will sit unevenly on it, and the new framing will telegraph the problem upward into drywall cracks within the first year.
- Spalling or flaking at the slab edge. Water wicks up through Quikrete when the mix was over-wetted during the pour, leaving the surface weak. A new structure bolted to that edge will chew through anchor points faster than it should.
- Visible gaps between the existing slab and the exterior wall. Soil erosion from heavy Fort Worth rains can undercut the perimeter. The slab is still intact, but it’s not carrying the load anymore, which means the new addition will inherit the same failure.
- Door or window openings in the existing structure that stick or bind. The slab has shifted enough to twist the framing. Adding square footage on top of that compounds the problem rather than solving it.
- Water pooling against the foundation after it rains. Fort Worth gets roughly 36 inches of rain a year, and when the grade around the house doesn’t shed it away, hydrostatic pressure pushes against the Quikrete and widens existing cracks. New pour or not, the drainage has to be corrected first.
Replacement Cost & What’s Included
A full Quikrete home addition or ADU foundation replacement in Fort Worth lands between $45,000 and $130,000. The low end covers a modest bump-out on stable soil with existing slab in good enough shape to tie into. The high end covers a detached ADU with new footings, stem walls, plumbing rough-in through the slab, and structural corrections on the existing foundation. What drives the spread comes down to three things: square footage, soil condition, and how much of the existing slab can be salvaged.
Every quote we write includes the full parts line: Quikrete or spec-matched concrete by the yard, rebar schedule, anchor bolts, vapor barrier, and the labor to demo, form, pour, and finish. No line item is a surprise at walkthrough. The 365-Day Done Right Promise covers the concrete work for a full year in writing. If the slab cracks beyond spec or the finish fails inside that window, we come back and correct it at no charge. That’s the point of putting the price and the guarantee on paper before we break ground.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can check a few things yourself: read the PSI rating on your existing bags, measure the crack width with a dime (if it swallows the edge, that’s beyond cosmetic), and walk the perimeter looking for erosion after a hard rain. What you shouldn’t do is attempt a foundation pour for a permitted structure on your own. Forming a level slab with the right rebar spacing and a clean vapor barrier is not a weekend project, and any mistake gets poured in place permanently. Concrete doesn’t forgive.
We’d rather see you call us at (682) 204-4897 before you buy the bags than after the inspector red-tags the pour. The estimate is free, and it comes in writing.
FAQs
A properly poured Quikrete foundation in Fort Worth should last 50 to 80 years if the soil underneath is stable and drainage is maintained. Texas clay movement and poor drainage are the two things that shorten that lifespan here more than the concrete itself. Call (682) 204-4897 if you want us to look at your specific slab before you build on it.
Yes, in many cases a cracked or settled Quikrete slab can be repaired with epoxy injection, slab jacking, or a partial saw-cut and re-pour, and that’s sometimes the smarter move before a home addition goes on top. If the slab is the only thing carrying the new structure, replacement is usually cheaper than betting on a patch. Call (682) 204-4897 for an engineering opinion and a written estimate.
Most Fort Worth addition or ADU foundation work takes 4 to 10 working days from demo to finished cure, depending on square footage and how much existing concrete has to come out. Weather delays are the main variable, since rain stops a pour faster than anything. Call (682) 204-4897 and we’ll give you a schedule tied to your specific scope.
Yes, we carry Quikrete 5000 PSI mix, crack-resistant mix, and a rotating stock of Quikrete patch and repair products for Fort Worth foundation scopes, and when your drawings call for a specific PSI we bring it in ahead of the pour. We’re an independent contractor, not affiliated with Quikrete, so we also keep spec-matched aftermarket mixes approved for structural work when Quikrete isn’t the right bag for the job. Call (682) 204-4897 and we’ll confirm what’s on hand for your start date.
Call Bradford Remodeling Co Fort Worth
Curtis Lane reads a job site before he reads the quote, which is why our scopes don’t grow legs mid-project. If your Quikrete foundation is standing between you and a home addition or ADU in Fort Worth, call (682) 204-4897 for a free estimate. You’ll get a written price, a straight answer on what your slab can carry, and a signed 365-Day Done Right Promise when the work is done. Straight scope, firm price, no surprises at final walkthrough.
We also handle the interior work that follows the concrete: KraftMaid and Cambria kitchens, Silestone counters, and the finish details that turn an addition into living space.
Written by Curtis Lane, Owner, Bradford Remodeling Co Fort Worth at Bradford Remodeling Co Fort Worth, serving Fort Worth and nearby areas.
