Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Aluminum Fence Installation Cost in Fort Worth?
Aluminum fence installation in Fort Worth typically runs $4,000 to $10,000 for a standard residential project in 2026. Most homeowners in Tarrant County pay around $28 to $45 per linear foot, including materials and labor. An average 150-linear-foot aluminum fence on a quarter-acre lot in neighborhoods like Wedgwood, Ridglea Hills, or Park Glen lands between $4,200 and $6,750 installed.
These numbers cover a complete job: fence panels, posts set in concrete, gate hardware, and a clean site at the end. Bradford Remodeling Co Fort Worth puts that price in writing before the first post hole is dug, so the number you approve is the number you pay.
If you’re comparing aluminum to other materials, you can see how it stacks up against vinyl fence installation costs and other home improvement projects across our service area.
Aluminum Fence Installation Cost Breakdown (2026)
Here’s how a typical Fort Worth aluminum fence project breaks down line by line. These are real ranges pulled from what our crews see across Tarrant County, not national averages padded with guesswork.
| Line Item | Cost Range | Notes |
|---|---|---|
| Aluminum fence panels (rail + pickets) | $14 – $24 per linear foot | Grade matters: residential vs. commercial gauge |
| Posts and post caps | $4 – $8 per linear foot | Post spacing every 6 to 8 feet |
| Concrete footings (3500 psi) | $3 – $6 per linear foot | Fort Worth clay soil needs proper depth |
| Labor | $7 – $12 per linear foot | Includes layout, digging, setting, leveling |
| Gate(s) with hardware | $300 – $900 per gate | Walk gates are less; double drive gates are more |
| Haul-away and site clean-up | $150 – $400 | Old fence removal runs extra if needed |
| Permit (if required) | $50 – $200 | Some Fort Worth neighborhoods require permits; we handle it |
A 150-foot run with one walk gate and one double drive gate on a typical Fort Worth residential lot lands between $5,200 and $7,800. That is the honest middle. Smaller jobs, say a 60-foot side-yard enclosure, can come in under $3,000. Larger estate properties in areas like Mira Vista or Montserrat with 300-plus linear feet and custom gate work can push past $10,000.
What Moves the Price Up
Grade changes. Fort Worth is not flat. If your yard slopes more than 12 inches over the fence run, the crew has to rack the panels, which means stepped or angled sections. That adds 10 to 15 percent in labor time. Tree roots from mature pecans and live oaks, which are everywhere in older neighborhoods like Arlington Heights and Mistletoe Heights, also slow digging.
Powder-coat color. Standard black is the least expensive finish. Bronze, white, and custom colors run 10 to 20 percent more per panel because they are typically special-order items with longer lead times. Bradford carries documented, name-brand aluminum systems with manufacturer specs on every order, so the finish warranty is traceable, not a handshake promise.
What Moves the Price Down
Straight runs with no gates. A fence that runs a clean property line with a single walk gate is the cheapest aluminum project we quote. The fewer breaks in the run, the less cutting and the fewer posts. Also, if you are replacing an existing fence where posts from a previous metal fence are sound, you can sometimes reuse the line and save on concrete and excavation. We will not reuse old posts, but a clean tear-out saves labor.
What Affects Aluminum Fence Installation Pricing in Fort Worth
Fort Worth has specific soil, climate, and permitting conditions that most national pricing sites never mention. Here is what actually moves the number on a quote in this market:
- Expansive clay soil. Much of Tarrant County sits on Houston Black clay. It swells when wet and shrinks when dry. Posts set too shallow will heave out of the ground within two or three seasons. That means footings need to go below the shrink-swell line, typically 24 to 30 inches in Fort Worth. This adds concrete volume and labor compared to sandy-soil regions, and it is the number one reason cheap aluminum fence quotes from out-of-area outfits fail.
- HOA requirements in master-planned communities. Neighborhoods in Alliance, Summer Creek, and parts of far north Fort Worth have design standards that dictate fence height, color, and even style. A 6-foot black spear-top panel might be fine in Ryan Place but rejected in a covenant-controlled community. Getting the wrong style installed costs you a redo. Bradford pulls HOA specs before quoting so the number is right the first time.
- Fort Worth lot sizes and setbacks. Quarter-acre lots dominate inside the Loop, but once you get to Crowley, Aledo, or Saginaw, half-acre and acre lots are common. More linear feet means more material, but it also lowers per-foot labor because crews set up once. A 300-foot run costs less per foot than a 60-foot run, but the total invoice is obviously higher.
- Gate count and gate type. Every gate is a separate structure: hinges, latch, concrete post footings on both sides, and a leveling adjustment. A double drive gate with a drop rod and self-closing hinges can add $700 to $1,100 on its own. Fort Worth homeowners with backyard vehicle access should budget for that specifically.
- Old fence removal and haul-off. If a wood fence or chain-link fence is already on the line, it has to come out before aluminum goes in. Removal runs $3 to $6 per linear foot depending on how the old posts were set and whether concrete was used. In older Fort Worth neighborhoods, we regularly find posts buried in two feet of concrete poured by a DIYer 20 years ago. That concrete has to be broken out, not just pulled.
- Time of year. Spring is the busiest season for fence work in Fort Worth. Quotes in March through May run 5 to 10 percent higher because crews are scheduled out two to three weeks. If you can schedule in late fall or winter, when North Texas ground is still workable, you may get earlier slots and better material pricing from distributors clearing inventory.
Aluminum vs. Other Fence Materials on Cost
Homeowners ask us all the time whether aluminum is worth the price compared to wood or vinyl. Here is the straight answer for the Fort Worth market:
- Wood (cedar or treated pine): $2,800 to $7,500 installed for a 150-foot run. Cheaper up front, but Fort Worth summers cook wood. Expect warping, splitting, and restaining every two to three years. Over a 10-year span, wood usually costs more.
- Vinyl: $3,500 to $9,000 for 150 feet. Comparable in price to aluminum, but vinyl gets brittle in the July heat and will crack if a football or baseball hits it hard enough. It also looks like plastic up close. Aluminum reads as wrought iron from the street without the rust.
- Wrought iron (steel): $6,000 to $16,000 for 150 feet. The premium option. It is heavier, requires periodic rust treatment, and costs more to install. Aluminum gives you the same look at roughly 60 percent of the price.
- Chain-link: $1,800 to $4,000 for 150 feet. This is the budget option. It is functional, not decorative. If you want your backyard to feel like a residential space rather than a utility easement, this is not it.
Aluminum does not rot, rust, warp, or need painting. In Fort Worth’s freeze-thaw cycles and 100-degree summers, that matters more than people think. A powder-coated aluminum fence should look the same in year 12 as it did on install day.
How to Save on Aluminum Fence Installation
Saving money on an aluminum fence does not mean finding the cheapest crew. It means tightening scope. Here is what actually works:
- Get your HOA packet before you call. Fort Worth HOAs are specific. Knowing the required height, color, and style before quoting eliminates change orders later. Change orders are where surprise invoices come from.
- Bundle the gate with the fence. If you need a gate anyway, install it as part of the original scope. Adding a gate later means re-setting posts and re-cutting panels, which costs more in labor than including it from day one.
- Skip custom finishes. Standard black powder coat is a commodity item and the least expensive. Bronze, white, and textured finishes are special order. If you do not care about the color, the fence gets cheaper.
- Remove the old fence yourself. If you want to save $450 to $900 on a typical lot, tear out the old wood or chain-link fence before the crew arrives. You will need a reciprocating saw, a post puller, and a Saturday. Many Fort Worth homeowners do this without issue, and we are happy to quote the job without removal.
- Get a written quote with a guaranteed number. The most expensive fence is the one that starts cheap and gets re-priced at the door. Bradford Remodeling Co Fort Worth operates under The Garrison Standard: a written price before work starts, no add-ons, no “we found a problem” upcharge halfway through. The quote is the contract.
For a free, no-pressure estimate on an aluminum fence in Fort Worth, call (682) 204-4897. You will speak to a live person, not a voicemail or a bid portal.
What the 365-Day Done Right Promise Covers
Every aluminum fence Bradford Remodeling Co Fort Worth installs is covered by the 365-Day Done Right Promise. Here is exactly what that means, in plain language:
- If any post shifts out of plumb within one year of installation, we reset it at no charge.
- If any weld, bracket, or fastener fails within one year, we replace it at no charge.
- If the gate sags, binds, or fails to latch within one year, we come back and adjust or replace the hardware at no charge.
- If the finish on any powder-coated panel shows a manufacturer defect within one year, we handle the warranty claim and replacement at no charge to you.
The guarantee is written, signed, and in your hand before we pack up the trailer. That is The Garrison Standard, and it applies to every job, not just fences. Curtis Lane, the owner of Bradford Remodeling Co Fort Worth, put this standard in place because he got tired of watching Fort Worth homeowners get burned by contractors who disappear the day after cashing the check. A live person answers our phones 24 hours a day, 7 days a week, so if something is not right, you reach a human, not a queue.
Aluminum Fence Installation Cost by Neighborhood in Fort Worth
Costs vary slightly by neighborhood because lot geometry, HOA rules, and soil conditions differ. Here is what our crews typically see:
- Wedgwood and Wedgwood East: Lots are larger, many with mature trees and clay soil. Expect $29 to $42 per linear foot for aluminum. Tree roots are common and slow post hole work.
- Ridglea Hills: Rolling terrain with elevation changes on many lots. Racked panels are common. Budget $30 to $45 per foot if your lot has noticeable grade shifts.
- Park Glen and Summer Creek: HOA-governed with strict height and color standards. Make sure the quote includes HOA compliance verification. Typical cost is $28 to $40 per foot.
- Arlington Heights and Mistletoe Heights: Historic districts with mature trees and older fence lines that often hide buried debris or old concrete. $30 to $44 per foot once removal and footing work are factored in.
- Crowley, Burleson, and Aledo: Newer subdivisions with larger lots and fewer trees. These are the most efficient jobs. $26 to $38 per foot is common.
These are not fixed prices. They are planning ranges. The only way to get a real number for your specific property is a site visit with a tape measure and a look at your lot. That is free at Bradford, and the number you get is the number that goes in the contract.
Frequently Asked Questions – Aluminum Fence Installation Cost in Fort Worth
How much does aluminum fencing cost per foot in Fort Worth?
Aluminum fencing in Fort Worth runs $28 to $45 per linear foot installed in 2026. That includes panels, posts, concrete footings, labor, and a standard gate. The per-foot cost drops as the run gets longer. If you want an exact number for your specific lot, call (682) 204-4897 for a free on-site estimate with no obligation.
Is aluminum fencing expensive compared to wood?
Up front, yes. Wood runs $18 to $35 per linear foot in Fort Worth, aluminum runs $28 to $45. But aluminum does not rot, warp, need painting, or require re-staining every two years. Over 10 years, aluminum is typically the cheaper fence because wood maintenance and repair costs stack up fast in the North Texas climate. If the math feels unclear on your project, a written itemized quote clears it up: call (682) 204-4897.
How long does aluminum fence installation take in Fort Worth?
Most residential aluminum fence jobs in Fort Worth are completed in 1 to 3 days. A standard 150-foot run with one gate typically takes two days: day one is layout, digging, and setting posts; day two is hanging panels, installing gates, and final leveling. Weather, tree roots, and difficult soil can extend that. Bradford schedules a specific crew with a specific start date, and we tell you that date before you sign.
Do I need a permit to install an aluminum fence in Fort Worth?
Fort Worth requires a permit for new fences over a certain height in some zoning districts, but most standard 4-foot to 6-foot residential aluminum fences do not require one. Some neighborhoods inside the city limits, particularly HOA-governed communities, have their own approval process. Bradford checks permit requirements and HOA rules for you before quoting, so there are no stop-work surprises. Call (682) 204-4897 and we will tell you what applies on your street.
Is it cheaper to install an aluminum fence yourself?
Only on paper. A DIY aluminum fence on a Fort Worth lot requires post hole digging to 24 to 30 inches in clay soil (often with tree roots), 3500 psi concrete mixing, and panel leveling that has no room for error. Getting posts out of plumb by half an inch shows up as a wavy fence line. You can buy materials at big-box home centers for $18 to $28 per foot, but a bad install costs more to fix than hiring a crew from the start. If you want it done right the first time with a written guarantee, call (682) 204-4897 for a free estimate.
Why Bradford Remodeling Co Fort Worth Quotes Differently
Most fence quotes in Fort Worth are verbal, vague, and loaded with contingencies. Bradford works under The Garrison Standard, which means three things that change how the quote process works:
- Written price before work starts. Not an estimate range. Not a ballpark. A written line-item price for the exact fence you approved. That number does not move unless you change the scope, and if it does, you approve the change in writing before we touch it.
- Documented material brands. The aluminum system we install carries a manufacturer name and a spec sheet. You get copies. The finish warranty is real because the product is traceable. No unbranded panels off the back of a distributor’s truck.
- Squared-away job close. When we finish, the site is clean. Old fence material is hauled off. The gate swings plumb and latches clean. You receive a signed copy of the 365-Day Done Right Promise. If anything fails inside that year, we come back and make it right at no charge.
Curtis Lane owns Bradford Remodeling Co Fort Worth, and he answers for the work under his own name. That is the difference between hiring a contractor and hiring a company that stands behind the job. If you want an aluminum fence quote in Fort Worth with a real number attached, call (682) 204-4897. A live person answers. That is how it works here.
Get a Written Aluminum Fence Quote in Fort Worth
The best way to know what your aluminum fence will cost is to have someone who knows Fort Worth soil, permits, and HOAs standing in your yard with a tape measure. That is what a Bradford estimate is. No pressure, no re-pricing at the door, and the number you approve is the number on the invoice.
Call (682) 204-4897 to schedule a free estimate for aluminum fence installation in Fort Worth. You will get a written quote, a straight answer on timeline, and a fence that holds.
Pricing reflects the Fort Worth market as of 2026. Bradford Remodeling Co Fort Worth offers free estimates – call (682) 204-4897.
Written by Curtis Lane, Owner at Bradford Remodeling Co Fort Worth, serving Fort Worth since 2004.
What Our Customers Say
"Respectful crew. Covered the floors and swept every day."
- Jackie T."Fixed price, written scope, and no surprise charges."
- Wes D."Home remodel with a new floor plan. Handled structural work and permits without drama."
- Gus R.
