Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Windows & Doors: The Fort Worth Owner’s Guide
If you have a Boral window or door that won’t close, leaks air, fogged glass, or a failed lock set, we can match the part and install it. Most Boral repairs in Fort Worth run $450 – $2,400 installed depending on whether it’s a replacement sash, balance, weatherstripping, hardware set, or full unit. We stock common Boral-compatible hardware on the truck and order OEM or matched aftermarket parts same-week for anything we don’t carry.
Here’s what we see most often in Fort Worth: a patio door roller wears flat from grit and the door starts dragging. A casement crank strips at the gear. A double-hung balance cable snaps and one sash won’t stay up. The homeowner doesn’t need a whole new window or door every time. They need the right part, matched to the right series, installed square. That’s what this page covers.
Which Boral Models This Applies To
Boral windows and doors came to market under several product lines over the years, including the Boral 100 Series, 200 Series, and Builders Series, alongside their patio door and hinged French door offerings. The part you need is tied to the series, the glass package, and the hardware generation. This is the compatibility gotcha most homeowners run into.
How to identify your Boral series: Look for a label on the head of the frame or the edge of the sash, usually a small silver or white sticker with a serial number and glass date code. If the label is gone, measure the visible glass width and the sash thickness. Boral sashes sit thinner than many vinyl competitors, and that dimension drives which balance, pivot bar, and weatherseal fit.
We always prefer OEM Boral parts when they’re available, especially for balances, sash locks, and multi-point door hardware. When OEM is discontinued, there are quality aftermarket equivalents that match the original tolerances. Curtis Lane won’t put a generic part in a Boral frame and call it good. If the fit isn’t right, the part fails early and you’re paying twice.
For the record: Bradford Remodeling Co Fort Worth is an independent service provider. We are not affiliated with Boral, and we don’t claim to be. What we do claim is that we read the label, measure the old part, and order the correct replacement the first time.
Styles & brands we work with
Signs Your Boral Windows & Doors Is Failing
- Window won’t stay open: The balance system has lost tension or a cable has snapped. Double-hung windows use block-and-tackle or spiral balances; both wear out with repeated cycling, and the failure is sudden, not gradual.
- Crank turns but window doesn’t move: The operator gear is stripped or the arm is bent. Boral casement operators are metal-geared on most series, but the gear teeth still round off after years of use.
- Door drags or scrapes the threshold: Roller assemblies on sliding patio doors collect grit and go flat. A flat roller scores the track, and once the track is grooved, you’re replacing the track too, not just the roller.
- You can see daylight or feel a draft around the sash: Weatherstripping has compressed or the sash alignment is off. Fort Worth heat cooks foam and vinyl weatherseal until it loses rebound, especially on west-facing openings.
- Fog or condensation between glass panes: The insulated glass unit seal has failed. This isn’t cleanable; the glass unit gets replaced, and it’s usually cheaper to replace the IG unit than the entire window.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what Boral parts and installation run in Fort Worth, parts and labor included:
| Repair Type | Installed Price Range |
|---|---|
| Weatherstripping replacement (per window or door) | $80 – $220 |
| Window balance or pivot bar replacement | $150 – $350 |
| Casement operator or crank replacement | $200 – $450 |
| Sliding door roller assembly (per door) | $180 – $480 |
| Door lock set or multi-point hardware | $250 – $650 |
| Sash replacement (single sash, OEM match) | $450 – $1,200 |
| Full window replacement (standard size) | $900 – $2,100 per window |
The range comes down to two factors: whether we can salvage the existing frame and whether the part is OEM or aftermarket. Every job gets a written price before any work starts, same as all Bradford work. If it’s not in the written scope, it doesn’t get billed. Period. Completed work carries our 365-Day Done Right Promise: if the part or the installation fails inside a full year, we come back and correct it at no charge.
DIY or Call Us?
Boral windows and doors are not inherently dangerous to service, but they are easy to get wrong. The most common DIY failure we repair is a balance that the homeowner installed backward or a door roller adjusted wrong so the door binds in six months. If you want to check something yourself, confirm the label, photograph the failed part from two angles, and get the measurements. That’s useful. Then call us.
What we’d rather you not do: take the sash out without releasing the balance tension correctly, force a bent operator arm, or drive new screws into a rotted substrate without addressing the wood. Those turn a $350 parts job into a $1,400 frame repair. If you can see rot or water damage around the opening, that’s structural, not a hardware issue, and you want a professional who will open the wall and check the substrate before quoting anything.
Call (682) 204-4897 and we’ll give you a straight number over the phone and a written quote before we touch anything.
FAQs
A well-installed Boral window in Fort Worth will typically give you 20 – 30 years on the frame, but the moving parts (balances, rollers, weatherstripping) are wear items with a 10 – 15 year service life under Texas sun and heat. West-facing units age noticeably faster. If your Boral windows are from the mid-2000s, expect to replace hardware before you replace glass.
Most Boral hardware failures are replacement cases, not repair cases. Stripped operator gears, snapped balance cables, and flat rollers don’t rebuild reliably in the field. The economical fix is a new matched part, installed correctly. If the damage is limited to compression-set weatherseal, that’s usually a clean replacement job without pulling the sash.
Most single-part repairs take 45 minutes to 2 hours on site. If we need to order an OEM sash or a full insulated glass unit, lead time in Fort Worth runs 5 – 14 business days depending on the series. We’ll tell you the expected date before you commit to anything.
We stock common Boral-compatible balances, pivot bars, rollers, weatherseal profiles, and lock sets on our service vehicles. For series-specific or less common parts, we order OEM or precision-matched aftermarket. We also work with KraftMaid, Cambria, and Silestone product lines for adjacent door and window openings, so the same crew handles siding-to-sill details without farming anything out.
Need a number you can plan around? Call (682) 204-4897 for a free estimate on your Boral window or door repair. Straight scope, firm price, no surprises at final walkthrough.
Written by Curtis Lane, Owner, Bradford Remodeling Co Fort Worth at Bradford Remodeling Co Fort Worth, serving Fort Worth and nearby areas.
