Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Fence Installation: The Fort Worth Owner’s Guide
CGI fence installation in Fort Worth typically runs $3,500 to $9,000 for a complete perimeter job, with most single-side replacements landing between $1,800 and $4,200 depending on linear footage and post condition. We stock CGI-compatible rails, brackets, and post caps on our trucks and can usually match your existing profile same week. Most owners discover the problem the hard way: a gate that suddenly drags, a panel that rattles in Texas wind, or a post that’s leaning after a hard rain and won’t square back up.
What you’re dealing with is rarely the CGI panel itself. It’s the hardware and post system around it. The panels are tough. The installation points are where fences fail in Fort Worth’s clay soil and 100-degree summers. We’ll get into exactly what to look for below.
Which CGI Models This Applies To
CGI (Commercial Grade Iron) panels come in a few distinct profiles, and matching the right one matters. The most common in Fort Worth neighborhoods are the 2-1/4″ and 2-1/2″ corrugated CGI panels, plus the flatter, wider-channel profile you see on older estate fences built before 2010. They are not interchangeable. A 2-1/4″ panel will not seat correctly in a 2-1/2″ channel bracket, and forcing it leaves you with a fence that buzzes in the wind and wears through its coating at the contact points.
Here’s the compatibility gotcha we see weekly: CGI panels are often paired with posts from a different manufacturer entirely. The original installer used whatever steel post was on the truck. That means your replacement brackets need to be measured against the post face, not just matched to the panel profile. We measure both before quoting. If the panel is a discontinued CGI finish, we source a powder-coat match from a Fort Worth-area coater rather than leaving you with a two-tone fence.
OEM CGI parts hold their finish longer, but aftermarket brackets and rail systems from Texas suppliers often equal or beat them on gauge thickness for 20-30% less. We’ll quote both and tell you which one we’d put on our own fence. That’s the standard Curtis Lane set when he started running jobs here: quote the straight scope, name the material, let the homeowner decide with real numbers in front of them.
Styles & brands we work with
Signs Your CGI Fence Installation Is Failing
- Gate drag or a gate that won’t latch. This is almost always a post that has rotated or settled out of plumb. Fort Worth’s clay soil expands and contracts with moisture, and a post set in concrete that’s only 18 inches deep will slowly walk. The panel and gate are fine; the post is the problem.
- Panels rattling or slapping in wind. Loose or missing self-tapping screws at the rail connections. Over time, Texas winds work those screws loose, especially on long fence runs with no mid-rail support. Left alone, the panel starts wearing the screw holes into ovals and the repair gets more involved.
- Rust bleeding at bracket points. This is galvanic corrosion, and it’s common when aluminum brackets were used on steel posts. The two metals react, the bracket sacrifices itself, and you get rust stains running down the post face. It’s a specific failure we see a lot in Fort Worth because of humidity swings.
- Posts leaning after rain. Shallow footings or posts that were dry-packed rather than poured. Fort Worth gets intense rain bursts, and saturated clay loses its grip. A post that leans now will lean more in the next storm cycle.
- Bottom rail separating from the post. Water pools at the bottom bracket, rusts the fastener, and the rail pulls free. This one is dangerous on gate sections because the panel can drop onto the gate hardware and bind it.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here are straight numbers for Fort Worth. A full CGI fence installation on an average city lot (roughly 150-180 linear feet) runs $3,500 to $9,000. That includes tear-out of the old system, new posts where needed, rails, brackets, fasteners, and the CGI panels themselves. A shorter run or a repair-heavy job, like replacing only the back fence line with existing posts in good shape, lands between $1,800 and $4,200.
What drives the range: post condition (reuse vs. replacement), linear footage, gate count, and whether you want OEM CGI finish or a matched aftermarket panel. Every quote includes a line-item breakdown so you see exactly what you’re paying for, and the price is written before any work starts. No number moves at the door. We’ve walked job sites in Fort Worth where the previous contractor quoted one thing and delivered another; that does not happen on a Bradford job.
All CGI fence installation work is covered by our 365-Day Done Right Promise. If the fence fails inside that year due to our workmanship, we come back and correct it at no charge. That’s in writing, signed, in your hand at final walkthrough.
DIY or Call Us?
Here’s an honest split. You can check for loose screws, look at post plumb with a level, and identify where rust is forming. That helps you know what you’re dealing with before you call anyone. What you should not do is attempt to re-set a leaning post or replace a bottom rail on a gate section yourself. A 6-foot steel panel under tension can swing hard when the last bracket releases, and that’s a hand or head injury waiting to happen. We’ve seen it. We strongly recommend a trained crew for anything involving post removal or gate rail work.
If you’re in Fort Worth and want us to put eyes on it, call (682) 204-4897. We’ll measure, quote, and tell you honestly if we’d fix it or replace it. Straight scope, firm price, no surprises at final walkthrough.
FAQs
A properly installed CGI fence in Fort Worth lasts 25 to 40 years on the panels, with the weak point being the bracket system, which typically needs attention around the 12 to 15 year mark. The biggest lifespan factor is post depth; fences set at 24 inches or deeper hold true through our clay-soil wet/dry cycles, while shallow posts fail in under a decade. Call (682) 204-4897 and we’ll inspect what you’ve got.
Yes, in most cases. If the panels are intact and only the post system, brackets, or rails are failing, we can reinforce, re-set, or replace those components for $1,800 to $4,200 depending on scope. We’ll review it with you on site. Call (682) 204-4897 for a free estimate.
A full CGI fence replacement on a standard Fort Worth lot takes 2 to 4 working days, including tear-out, post setting, and panel installation. Repairs are often done in a single day. We set posts with proper depth and let the concrete cure before mounting panels, so we don’t rush the part that determines how the fence holds up. Call (682) 204-4897 and we’ll give you a timeline with your quote.
We keep common CGI brackets, rails, post caps, and fasteners on our trucks for routine repairs, and we source panels and finish-matched components from approved suppliers within a few days for most Fort Worth jobs. We are an independent service provider, not affiliated with CGI. We also stock parts for KraftMaid, Cambria, and Silestone products when a project crosses over into the home. Call (682) 204-4897 and we’ll confirm availability for your specific profile.
Written by Curtis Lane, Owner, Bradford Remodeling Co Fort Worth at Bradford Remodeling Co Fort Worth, serving Fort Worth and nearby areas.
