Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ECO Window Systems Fence Installation: The Fort Worth Owner’s Guide
If you own ECO Window Systems fencing in Fort Worth and a section has failed, here’s the straight answer: a full fence installation using ECO Window Systems-compatible materials typically runs $3,500 to $9,000 installed, and we carry the common replacement components on our trucks for most residential jobs. That range covers tear-out of the old section, new posts set in concrete, rails, panels, and hardware, plus cleanup. Most Fort Worth homeowners discover the problem after a storm, a vehicle bumped a section, or the bottom rail finally separated from a post after years of clay soil movement.
What you’re dealing with is usually not a total fence failure. It’s one of three things: a post that heaved or rotted at the base, a rail that pulled free from its bracket, or panel sections that warped in the Texas sun. We see all three constantly across Fort Worth, from Wedgwood to Saginaw to the neighborhoods off Camp Bowie.
Which ECO Window Systems Models This Applies To
ECO Window Systems fence products share a common rail-and-bracket design across their residential lines, but not all parts interchange. The two series you’re most likely to have are the standard 6-foot privacy panel and the shorter 4-foot decorative/ranch panel, both using a tongue-and-groove style interlock. The key spec we check on site is the gap between post centers, which runs either 72 inches or 96 inches. If your posts are set at 96 inches and you order 72-inch rails, you’ll have a two-foot splice in the middle of the run that looks off and collects water.
Here’s the compatibility gotcha Fort Worth owners hit most often: ECO Window Systems changed their bracket stamping around 2019, so older fences with the square-top posts won’t accept the newer U-channel brackets without shimming. We keep a stock of the older bracket pattern in the shop because we run into it on about a third of Fort Worth repair calls east of I-35W, where homes tend to be older construction. Bradford Remodeling Co Fort Worth is an independent service provider, not affiliated with ECO Window Systems, but we match OEM components where they’re still manufactured and use equivalent-grade aftermarket parts when OEM has been discontinued.
You’ll find the model tag riveted to the inside face of the first post from your gate. It gives the series code and the panel height. If the tag’s gone, measure the panel thickness: the privacy line runs a true 1.5 inches, the ranch line 1 inch. That single measurement tells us which part family we’re working in.
Styles & brands we work with
Signs Your ECO Window Systems Fence Installation Is Failing
- Post lean at the gate hinge. The gate’s weight pulls the post out of plumb over time, especially in Fort Worth’s expansive clay soil. Once the post is off more than two inches, the latch stops engaging cleanly and the bottom rail starts binding.
- Gaps opening between panels. ECO Window Systems panels rely on tight interlocking edges. When you see daylight between sections, the rail brackets have stretched or the post footings have shifted, and the panels are now bearing weight they weren’t designed to carry.
- Bottom rail rot or powder-coat bubbling at grade line. Sprinkler overspray and standing water where the rail meets the lawn are the two big culprits. The rail’s end cap traps moisture, and once the coating goes, the aluminum underneath pits within a season or two.
- Rattling or buzzing panels in wind. That’s the bracket screws backing out. It’s not just noise: loose brackets transfer wind load directly into the post anchors, and the rocking will wallow out the screw holes beyond a simple retighten.
- A section that’s visibly lower than the run on either side. That tells you a post footing has settled or heaved. In Fort Worth, heaving is almost always from water following the fence line after heavy spring rains or a broken irrigation line.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For a full ECO Window Systems fence installation in Fort Worth, the installed price runs $3,500 to $9,000. A partial section repair, where we replace one or two posts and the matching panels, usually lands between $800 and $2,500 depending on how much concrete work the footings need. The spread on the full range comes down to total linear feet, gate count, whether we’re pulling old footings or cutting and leaving them, and whether the access is open or tight against a structure.
Every quote includes tear-out and haul-off, new galvanized posts set in concrete with the correct below-grade depth for our freeze line, rails, panels, brackets, and hardware, plus a walkthrough where you get the written price before any work starts. No numbers that move at the door. The 365-Day Done Right Promise covers the install: if the fence fails inside a year because of our workmanship, we return and correct it at no charge. That’s in writing, signed, in your hand at job close.
DIY or Call Us?
You can safely check a few things yourself: whether a post is actually loose versus just out of plumb, whether the brackets are still tight against the post face, and whether standing water pools at the base of any post. Those observations help us diagnose over the phone before we even send a crew out.
Where DIY goes wrong on ECO Window Systems fences is the post replacement. The old footing has to come out full-depth, and in Fort Worth clay that usually means digging a bell-shaped hole wider than the post itself, which is slow, heavy work. Set the post even a few degrees off plumb and every panel downstream compounds the error. High-wind sections and any run over six feet also put real load on the hardware, and a failed section can come down on a car or a person. If you’re not set up for concrete work and a clean 4-foot-deep dig, call us at (682) 204-4897 and we’ll get you a written estimate.
FAQs
A properly installed ECO Window Systems fence in Fort Worth typically lasts 15 to 20 years before the panels or posts need major attention. Our sun and clay soil do most of the damage, not the materials themselves. Call (682) 204-4897 if you’re seeing signs earlier than that, and we’ll tell you whether it’s a fix or a full replacement.
Yes, in most cases a single post or a two-panel section can be repaired for $800 to $2,500 without touching the rest of the fence. If the footing has failed, we remove and reset it; if the panel alone is warped, we swap it and keep your existing rails. Call (682) 204-4897 for an on-site assessment and a written number.
Most full fence installations in Fort Worth are completed in two to three working days, including tear-out, footings, and cleanup. Concrete cure time is the only thing that can stretch it, and we build that into the schedule upfront so it’s never a surprise. Call (682) 204-4897 to get a timeline with your estimate.
We carry the common ECO Window Systems-compatible brackets, end caps, rails, and panel sections on our trucks for most residential jobs in the Fort Worth area. Older series parts may take a day to pull from our shop stock, and we also work with equivalent-grade aftermarket components when the OEM part is no longer made. Call (682) 204-4897 with your model tag handy and we’ll confirm before we roll.
If you’re in Fort Worth and your ECO Window Systems fence is failing, call Bradford Remodeling Co Fort Worth at (682) 204-4897 for a free estimate. You’ll get a straight scope, a written price, and a signed 365-Day Done Right Promise before we touch a single post. Straight scope, firm price, no surprises at final walkthrough.
Written by Curtis Lane, Owner, Bradford Remodeling Co Fort Worth at Bradford Remodeling Co Fort Worth, serving Fort Worth and nearby areas.
