Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ES Windows Kitchen Remodeling: The Fort Worth Owner’s Guide
If you’re remodeling a Fort Worth kitchen that includes ES Windows products, a full kitchen remodel typically runs $14,000 to $45,000 installed, depending on cabinet grade, countertop selection, and whether we’re moving plumbing or electrical. We stock and install ES Windows-compatible hardware and work with their window and door units on kitchen remodels across Fort Worth, from stockyards-area gut rehabs to new builds on the south side. Most homeowners find us the same way: the kitchen window or door has failed, or they’re replacing cabinets and realize the existing window rough-in doesn’t match the new layout.
Here’s what you need to know before you spend a dollar: most ES Windows kitchen failures aren’t the glass. They’re the hardware, the seals, or the rough opening that was never flashed right in the first place. We’ll walk through all of it below, with real numbers for Fort Worth.
Which ES Windows Models This Applies To
ES Windows produces several series lines commonly installed in Texas kitchens, including their fixed picture windows, horizontal sliders, and casement units. The model number is stamped on a small metal tag on the inside frame edge, usually near the upper corner on the hinge side. If that tag is missing, we measure the glass unit height, width, and frame depth to identify the series.
Here’s the compatibility gotcha Fort Worth owners run into: ES Windows uses different frame depths between their builder-grade line and their custom series. A replacement sash from a builder-grade unit will not seat correctly in a custom frame, even if the glass dimensions match. We verify the series before ordering anything. For kitchen remodels specifically, many Fort Worth homes built since 2010 have ES Windows sliders above the sink. The weak point on those is the roller assembly. On older custom casements, the crank gear wears out first.
We carry OEM hardware for ES Windows common kitchen units on our trucks, and for discontinued series we source quality aftermarket equivalents with the same load ratings. You get the same function without waiting six weeks for a factory part that’s been out of production for years.
Styles & brands we work with
Signs Your ES Windows Kitchen Remodeling Is Failing
- Condensation between the glass panes: The seal on the insulated glass unit has failed. Air is getting in, and the argon fill is gone. You can’t reseal that from the outside; the glass unit gets replaced.
- The window sticks or drags when you open it: On ES Windows sliders, this is usually worn rollers or a bent track. On casements, it’s the crank gear slipping. Either way, forcing it makes the damage worse.
- You can feel a draft around the frame when the window is closed: The weatherstripping has compressed, or the rough opening was never properly insulated at install. In Fort Worth summers, this usually means the foam seal has cooked and shrunk.
- Water staining on the interior drywall below the window: That’s not the window itself failing. That’s flashing or weep holes clogged. We see this all the time after Texas storm seasons, and the fix is in the rough opening, not the glass.
- The frame itself is soft or shows cracks: The unit has reached the end of its working life. Replacing the glass won’t help; the frame goes with it.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For a full kitchen remodel in Fort Worth that includes ES Windows replacement or integration, you’re looking at $14,000 to $45,000 installed. That covers demolition, any structural work in the rough opening, cabinet installation, countertop installation, and the window or door work itself. Smaller scopes, like swapping a failed ES Windows unit while we’re already in the kitchen for a cabinet job, run less: individual window replacement tied into a remodel typically falls in the neighborhood of $4,500 to $15,000 depending on window size and series.
What drives the range on kitchen work is what’s behind the walls and what you’re putting back in. KraftMaid cabinets, Cambria or Silestone counters, Kohler fixtures: those are the brands we document in the written scope. Every line item is priced before we start, and that price does not move at the door. No change orders appear unless you ask for something different. When the work is done, you get a signed written guarantee in your hand: the 365-Day Done Right Promise, which covers the full kitchen remodel for one year. If anything fails inside that window, we come back and correct it at no charge.
DIY or Call Us?
There’s a safe middle ground here. You can check the model tag, clean the track, and see whether the frame shows water staining. Those are diagnostic steps, and they help you tell us exactly what you’re seeing when you call.
Where DIY goes wrong: any attempt to pull an ES Windows sash without releasing the spring clips correctly will damage the frame, and glass units are under load. A slip with a pry bar on a stuck slider has sent more than one homeowner to the hospital. That’s not a warning; it’s what the failure actually looks like. If the glass is fogged, the unit is shot. If the frame is soft, the wall needs to come apart. Neither is a weekend project. Call (682) 204-4897 and we’ll come look at it, quote it in writing, and tell you straight whether it’s a window-only fix or part of a bigger kitchen scope.
FAQs
In Fort Worth, we plan on 15 to 20 years for the glass seals before the argon escapes and the panes fog, and we’ve seen seals fail in as little as 8 years on full-sun south-facing kitchens. The hardware, especially rollers and crank assemblies, typically needs attention between years 10 and 15. The frame itself should outlast the glass. If the frame is compromised before the 15-year mark, the original installation is usually at fault, not the window. Call (682) 204-4897 for an exact assessment of your unit.
No. Once the insulated glass seal fails, the argon fill is gone and there’s no way to reseal it in the field. We replace the glass unit itself, which is cheaper than a full window replacement and restores the thermal performance. In a kitchen remodel, we often handle this while walls are already open. Call (682) 204-4897 and we’ll quote the glass swap as part of your written scope.
For a straightforward ES Windows replacement in an existing rough opening, it’s a half-day job once the unit is in hand. If we’re reframing the opening to accommodate a different cabinet layout, the window work is sequenced alongside the structural and cabinetry phases, so it’s part of the broader remodel timeline. We’ll lay out the full schedule in your written quote. Call (682) 204-4897 to get that number.
Yes. We carry common ES Windows rollers, crank assemblies, and weatherstripping for the builder-grade and custom series most often installed in Fort Worth kitchens. For discontinued series or odd-sized units, we order through our suppliers, and the lead time is typically a week or less. Call (682) 204-4897 with your model number and we’ll tell you whether we have what you need before we even schedule the visit.
You’ll work with Curtis Lane and the Bradford Remodeling Co Fort Worth crew from the first walkthrough through final walkthrough. Curtis reads the job site before he reads the quote: he checks the rough opening, the framing, the existing window condition, and the cabinet layout before a single line item goes on paper. Straight scope, firm price, no surprises at final walkthrough. Call (682) 204-4897 to schedule your free estimate.
Written by Curtis Lane, Owner, Bradford Remodeling Co Fort Worth at Bradford Remodeling Co Fort Worth, serving Fort Worth and nearby areas.
