Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ES Windows Roofing: The Fort Worth Owner’s Guide
We stock and install ES Windows-compatible roofing parts for homeowners across Fort Worth, with most replacements running $400 – $1,800 installed depending on the component and roof pitch. If you’ve got an ES Windows roof assembly that’s leaking, lifting, or showing rust trails, we can usually match the part and get a technician out the same week. Most owners discover the failure after a hard Texas storm, when water spots show up on the ceiling or daylight peeks through a lifted seam at the ridge.
ES Windows is not a roofing manufacturer by trade, which means the roofing components attached to or integrated with their window and skylight assemblies are the usual failure points. We handle those intersections daily across Fort Worth, from Tanglewood to Wedgwood, and the fix is almost always faster than homeowners expect once the right part is in hand.
Which ES Windows Models This Applies To
The roofing components we match and install most often tie to ES Windows skylight flashings, curb-mounted units, and the flashing kits used on their larger fixed-glass and operable window assemblies that sit near rooflines. If your ES Windows unit has a factory curb or an integrated nailing flange, the roofing seal around it is the part that tends to go first. The key compatibility gotcha: ES Windows uses metric-width flashing profiles on several series, and a standard American flashing kit off the shelf at a Fort Worth supply house will not seat correctly. We measure the curb and the glass frame separately before ordering.
OEM parts are the clean choice when the window assembly is still under manufacturer warranty, because using an aftermarket flashing can void the coverage. For older ES Windows units that are out of warranty, a quality aftermarket flashing kit with a butyl-backed base and a formed aluminum counterflashing holds up as well as the original in North Texas heat, provided the installer details the corners properly. We stock common ES Windows flashing profiles and sealant systems on our trucks, and we can order the obscure sizes within a few business days.
Styles & brands we work with
Signs Your ES Windows Roofing Is Failing
- Water staining on the ceiling below the window or skylight. This usually means the roof-to-flashing seal has separated. In Fort Worth, the freeze-thaw cycle between November and February opens hairline gaps that a summer storm then drives water through.
- Rust trails or streaking on the metal flashing visible from the ground. The galvanized coating is failing, and once rust starts on ES Windows flashing, the metal thins fast. Rainwater carries the rust oxide down the roof, leaving a telltale orange streak.
- Daylight visible through the corner of the window assembly from inside the attic. The corner detailing has pulled loose or the sealant has dried and cracked. This is the most direct sign the roofing seal is compromised.
- Granule buildup in the gutter directly below the window. The shingles around the ES Windows unit are wearing faster than the rest of the roof, usually because water is being channeled onto them by a failing counterflashing.
- Drafts or whistling around the interior trim of the window. The roofing underlayment at the curb has deteriorated, and air is moving through the roof assembly into the conditioned space. This also shows up as higher cooling bills in a Fort Worth August.
Replacement Cost & What’s Included
In Fort Worth, ES Windows roofing-related repairs run $400 – $1,800 for most flashing replacements, reseals, and local shingle work around the unit. A full roof replacement around a large skylight assembly can run $8,000 – $20,000 on the high end, which is the range for complete roof replacement jobs in this market, not the part itself. The big drivers are the roof pitch, the number of flashing pieces, and whether the decking under the unit has rotted and needs to be replaced before the new flashing goes in.
Every ES Windows roofing repair we quote includes the parts, the labor, the sealant system, disposal of the old flashing, and a clean site at the end of the day. You get a written line-item price before any work starts, which is how Bradford Remodeling runs every job in Fort Worth. If the repair fails within one year, the 365-Day Done Right Promise means we come back and correct it at no charge. No re-pricing, no phone tag.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Here’s the honest split. You can safely check your ES Windows unit from the ground with binoculars: look for lifted flashing corners, missing shingle tabs, and rust streaks. What you should not do is get on a Fort Worth roof with a caulk gun and start resealing. Roof work on a pitched surface without proper fall protection is how homeowners end up in the emergency room, and a bad sealant bead around an ES Windows curb just traps water behind it and rots the decking faster.
If you’re comfortable in the attic, you can check for daylight at the corners and feel for damp insulation around the curb. That tells you where the leak is coming from without ever leaving the ladder. For the actual repair, the flashing has to be cut, folded, and sealed in the right sequence, and the window’s weep system has to stay clear. That’s the work we do every week. Call us at (682) 204-4897 and we’ll send a technician who can tell you what’s actually wrong before quoting a number.
FAQs
Most factory flashing and sealant systems around ES Windows units last 12 to 18 years in North Texas, where summer roof temperatures above 150°F bake sealants faster than in milder climates. If your unit is past the 15-year mark and you’re seeing rust or granule loss, budget for replacement before the next storm season. Call (682) 204-4897 for a written quote.
Yes, if the flashing metal is still structurally sound, a reseal and corner re-detail will stop the leak for years, and that’s the $400 – $800 end of the range. If the metal is rusted through or the decking below is soft, replacement is the only honest fix. We’ll tell you which one you’re looking at, and the price won’t change once we start.
Most flashing replacements and reseals around an ES Windows unit take one day on-site, including removing the old sealant, prepping the substrate, and installing the new flashing. If decking repair is needed, add a second day. We protect the window assembly and the interior below it the entire time.
We stock the common ES Windows flashing profiles, sealant systems, and curb kits on our trucks in Fort Worth, so many repairs are done the same week we diagnose them. The uncommon sizes and discontinued series take a few business days to source. Either way, you get a written price before the part is ordered. Call (682) 204-4897 for a free estimate.
Contact Bradford Remodeling Co Fort Worth
If your ES Windows roofing is leaking, lifting, or showing rust, call us at (682) 204-4897. We’ll send a background-checked, uniformed technician to your Fort Worth home, diagnose the failure honestly, and hand you a written price before any work begins. No re-pricing at the door, no unfinished jobs, and a signed guarantee in your hand when the work is done. That’s the Garrison Standard, and it applies to every repair we do. Straight scope, firm price, no surprises at final walkthrough.
Written by Curtis Lane, Owner, Bradford Remodeling Co Fort Worth at Bradford Remodeling Co Fort Worth, serving Fort Worth and nearby areas.
