Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
GAF Driveway & Pavers: The Fort Worth Owner’s Guide
We stock and install GAF-compatible driveway and paver systems throughout Fort Worth, with most full paver driveway installations running $7,000 to $18,000 depending on square footage, substrate condition, and paver grade. If you’re reading this, you’ve likely got a sunken section, a cracked border course, or a paver that’s shifted out of level after a hard Texas rain. GAF pavers themselves rarely fail outright; what fails is what’s underneath them, and that’s where the repair should start.
Bradford Remodeling Co Fort Worth is an independent service provider. We’re not affiliated with GAF, but we work with their paver and hardscape lines regularly because the specifications are consistent and traceable. That matters when you’re matching a replacement course five years after the original install. Curtis Lane and our crew have been working Fort Worth driveways long enough to know that clay soil movement in neighborhoods like Wedgwood and Ridglea Hills punishes a bad base before it ever touches the paver itself.
Which GAF Models This Applies To
GAF’s hardscape division produces paver systems under their Timberline and Glenwood product lines, most commonly sold through roofing and exterior supply houses across North Texas. The pavers come in modular sizes: 4×8, 6×9, and a 12×12 slab format, with thicknesses of 60mm for pedestrian areas and 80mm for driveway-rated traffic. If you’re trying to identify what you have, flip a paver and look for the molded manufacturer stamp and the size code. That stamp tells us everything we need to order a matching replacement.
The OEM versus aftermarket question is straightforward for GAF pavers. OEM replacements match color lot and dimension exactly, which matters when you’re patching a visible section mid-driveway. Aftermarket equivalents from Belgard or Unilock are structurally sound and often less expensive, but the color blend will never be a perfect match to a weathered GAF surface. For full tear-out and re-install, aftermarket is fine. For a surgical patch, we order GAF and wait the two weeks rather than leave you with a checkerboard.
Styles & brands we work with
Signs Your GAF Driveway & Pavers Is Failing
- Settling or dipping sections near the garage apron. This is almost always a base failure, not a paver failure. Fort Worth’s expansive clay soil heaves and contracts with moisture, and a base that wasn’t compacted in lifts will eventually drop. The pavers are just along for the ride.
- Sand washing out between joints after heavy rain. Polymeric sand breaks down over time, and when it goes, the pavers lose their interlock. You’ll see weeds first, then movement. Left alone, that movement spreads outward from the first loose paver.
- Cracked or spalled pavers in the tire tracks. Vehicle weight on a thin paver or an uneven base will crack the surface. This is common on older installs where a 60mm pedestrian paver was used on a driveway rated for 80mm.
- Border courses separating from the field. The edge restraint is failing or was never installed properly. Once the border lets go, the whole field starts drifting outward under load.
- Standing water pooling in low spots. A driveway should drain, not pond. If water sits after a storm, the base is compromised below that spot, and the fix is a localized tear-out and re-compaction, not just re-leveling the surface pavers.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For a paver driveway installation in Fort Worth, you’re looking at $7,000 to $18,000 installed. A paver patio runs $3,500 to $11,000. If the base is salvageable and you only need a partial reset or paver replacement, the job lands on the lower end. If we’re pulling up a failed base, hauling off spoil, and re-compacting from the bottom, the price climbs accordingly.
Every quote from Bradford Remodeling Co Fort Worth includes the written price before any work starts, with line items for excavation, base material, paver supply, sand, and labor. No numbers move at the door. The 365-Day Done Right Promise covers the completed work for a full year; if anything fails inside that window, we come back and correct it at no charge. That’s The Garrison Standard, and it’s in writing on every job.
DIY or Call Us?
You can safely inspect your own driveway. Look for the symptoms above, check whether water drains or ponds, and note whether any pavers rock underfoot. What you shouldn’t do is start pulling pavers on a driveway section without understanding how the base was built. Paver work looks simple until you’re two feet into a failed base with no compactor and no plan for what goes back in.
That said, if you’ve got one cracked paver in an otherwise solid field, a careful homeowner with the right replacement paver can make that swap. The risk is matching the sand and the color. If in doubt, call us at (682) 204-4897 and we’ll tell you honestly whether it’s a driveway-rated fix or a weekend project you can handle. Straight scope, firm price, no surprises at final walkthrough.
FAQs
A properly installed GAF paver driveway in Fort Worth lasts 25 to 30 years, but the base underneath may need attention at the 15-year mark due to clay soil movement. The pavers themselves hold up; the failure point is almost always the substrate. Call (682) 204-4897 for an inspection if your driveway is past year 15 and showing settlement.
Yes, if the base is intact and the damage is limited to surface pavers or a localized low spot. We re-level and re-sand localized areas regularly. If the base has failed in multiple spots, a full re-install is usually cheaper than chasing patches. Call (682) 204-4897 and we’ll tell you which situation you’re in.
Most residential paver driveway replacements in Fort Worth take 3 to 5 working days from tear-out to final sand and compaction. Weather delays are real in North Texas spring storms, but the work itself is methodical, not slow. We’ll give you a written timeline with your written price.
We stock common GAF modular sizes and border courses on the truck for patch jobs, and we order full pallet quantities for tear-out and re-install work. Lead time on special-order colors is typically two weeks in Fort Worth. We also carry KraftMaid, Cambria, and Silestone lines for interior work if your project scope extends beyond the driveway.
Written by Curtis Lane, Owner, Bradford Remodeling Co Fort Worth at Bradford Remodeling Co Fort Worth, serving Fort Worth and nearby areas.
