Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Owens Corning Kitchen Remodeling: The Fort Worth Owner’s Guide
Owens Corning kitchen remodeling in Fort Worth typically runs $14,000 to $45,000 installed, depending on cabinet count, countertop material, and whether we’re pulling permits for structural changes. We keep scheduled availability for Owens Corning kitchen projects across Tarrant County and can usually get a crew on your calendar within two to three weeks, not two to three months. Most homeowners call us after living with a kitchen that fights them every day: drawers that stick mid-July, cabinet frames that soaked up one too many spills, or a layout that worked in 1998 and hasn’t worked since.
We’re an independent Fort Worth contractor, not a factory arm of Owens Corning. What that means for you: we spec Owens Corning materials where they perform, and we install them to manufacturer requirements so the warranty stays intact.
Which Owens Corning Models This Applies To
Owens Corning doesn’t make cabinets or countertops. That’s the first compatibility gotcha most Fort Worth homeowners hit when they start researching. Owens Corning’s kitchen footprint lives in the insulation and building-science layer: FOAMULAR rigid foam board behind exterior kitchen walls, PROPINK fiberglass batts in stud cavities, and their acoustic insulation that keeps the dishwasher from rattling the whole first floor. When we do a kitchen remodel in Fort Worth, Owens Corning product goes into the walls before cabinets ever go up.
So “compatibility” here means matching the right Owens Corning insulation spec to your kitchen’s wall assembly. FOAMULAR comes in R-values from R-5 to R-10 depending on thickness, and it matters which one goes behind a galley kitchen on a west-facing wall that sees 105-degree Fort Worth afternoons. The label is on the board edge. If a previous remodeler dropped in cheap batt insulation and drywalled over gaps, we find out fast once the infrared thermometer comes out. Aftermarket equivalents exist at big-box stores, but the Owens Corning branded board has consistent density and a warranty we can point to when the inspector asks.
Styles & brands we work with
Signs Your Owens Corning Kitchen Remodeling Is Failing
- Cold spots on kitchen walls in winter. Missing or compressed insulation behind the drywall. We saw this in a Fairmount bungalow where the north wall was never insulated to begin with, and the homeowner had been paying to heat the backyard for six years.
- Cabinet boxes sweating or warping on exterior walls. No rigid foam barrier between the studs and the drywall, so summer humidity condenses right behind the cabinets. The cabinet doors swell; the foam board would have stopped it.
- Dishwasher noise bleeding through the wall into the dining room. The stud cavity behind the appliance has no acoustic batt. Owens Corning makes a specific sound-control product for exactly this.
- Rim joist or crawlspace air leaking into the kitchen floor. You feel a draft at the toe-kick. That’s an insulation gap under the floor, common in older Fort Worth pier-and-beam homes where a handyman skipped the details.
- Pest intrusion through exterior kitchen walls. Gaps in insulation give rodents a highway. Closed-cell foam board and tight batt work stops them cold; we’ve rebuilt enough chewed cabinet bases to know.
Replacement Cost & What’s Included
The $14,000 to $45,000 range for a full Owens Corning kitchen remodel in Fort Worth covers insulation tear-out and replacement, drywall repair, cabinet installation, countertops, plumbing rough-in for the sink line, and basic electrical updates to code. Where you land in that range depends on kitchen size, whether the remodel is gutted or surfaced, and whether we’re doing the whole job or just the wall assembly correction.
Here’s the line-item picture for a typical Fort Worth mid-size kitchen:
| Scope | Typical Installed Cost |
|---|---|
| Insulation replacement (walls + rim joist) with Owens Corning FOAMULAR or PROPINK | $1,200 – $3,800 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Full kitchen remodel (all scopes combined) | $14,000 – $45,000 |
Every line gets written down before we start. No number moves at the door. The 365-Day Done Right Promise covers the work for a full year after completion: if anything we installed fails inside that window, we come back and correct it at no charge. That’s the Garrison Standard, and it applies to every job Curtis Lane’s crew takes in Fort Worth.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely check a few things yourself: pull a cabinet kick plate and look for visible gaps in the wall cavity, feel for drafts at the baseboards on exterior walls, and check if the insulation you can see is compressed or water-stained. That tells you whether you actually have a problem worth fixing.
What you shouldn’t do is tear out drywall blind. Fort Worth homes built before roughly 1980 may have asbestos in joint compound or old wiring you don’t want to hit with a utility knife. Let a trained professional handle the invasive work. If you’re in Fort Worth and seeing any of the symptoms above, call (682) 204-4897 and we’ll do a proper inspection with a straight answer on what needs fixed and what doesn’t.
FAQs
Owens Corning FOAMULAR and PROPINK products are rated for the life of the structure, 50-plus years, as long as they stay dry and uncompressed. Call (682) 204-4897 if you suspect water damage or animal intrusion has compromised yours.
In many Fort Worth homes, yes. We can spot-fix gaps and air leaks without a full tear-out, which keeps cost at the lower end of the range. An inspection tells us which scopes are actually needed, and the quote reflects that, not a wish list.
For a standard Fort Worth kitchen wall assembly, the insulation and drywall work runs one to three days. The full kitchen remodel, cabinets through backsplash, typically takes three to six weeks depending on material lead times.
We maintain inventory of common Owens Corning FOAMULAR thicknesses and PROPINK batts for Fort Worth jobs, and special-order anything outside spec within a week. Call (682) 204-4897 and we’ll check availability while you’re on the line.
Call Bradford Remodeling Co Fort Worth
If you’re ready to get a written price for your Owens Corning kitchen remodel in Fort Worth, call (682) 204-4897. A live person answers, day or night. We’ll schedule a walkthrough, put the scope in writing, and stand behind the work for a full year. Straight scope, firm price, no surprises at final walkthrough.
Written by Curtis Lane, Owner, Bradford Remodeling Co Fort Worth at Bradford Remodeling Co Fort Worth, serving Fort Worth and nearby areas.
