Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Bathroom Remodeling: The Fort Worth Owner’s Guide
If you bought a home in Fort Worth with PGT windows in the bathroom and the frame is now soft, fogged, or leaking at the sill, you’re not replacing the glass – you’re rebuilding the opening. A full PGT bathroom remodel typically runs $4,500 – $12,000 installed in Fort Worth, depending on whether it’s a shower window replacement or a full wet wall rebuild. We keep PGT-compatible framing materials in stock and can usually start the tear-out within a week of the written estimate. Most owners discover the problem the same way: black staining at the drywall seam under the window, a window that won’t close square anymore, or water that pools on the sill after every shower.
Which PGT Models This Applies To
PGT’s bathroom work in Fort Worth almost always involves one of three product lines: the WinGuard impact series (common in homes built after the 2010 hail seasons), the Spectrum vinyl line (builder-grade but solid), and the older ClassicVue aluminum frames still turning up in 1980s and 1990s ranches. The compatibility gotcha is in the frame depth. WinGuard frames are 2-5/8 inches thick where they meet the rough opening; Spectrum runs 2-1/4. If you replace a WinGuard with a Spectrum without reframing, the interior trim won’t sit flush and the sill will pitch toward the room instead of toward the weep holes. We check the label etched into the corner of the glass before we quote – the model number and glass pack code are there. For OEM replacement, PGT still supports current WinGuard and Spectrum lines, but waiting on a factory order can push a Fort Worth job out three to six weeks. Quality aftermarket vinyl units with matching Low-E and impact ratings install in the same opening and carry their own manufacturer warranty. Curtis Lane reads the label first, then prices the job both ways so you can decide with real numbers in front of you.
Styles & brands we work with
Signs Your PGT Bathroom Remodeling Is Failing
- Persistent fog between the panes. The seal has failed; the insulating gas is gone and the glass is now just two panes losing heat. In a bathroom with daily steam, that fog becomes a permanent haze wall inside of a season.
- Soft or spongy drywall under the sill. Water has been sneaking past the frame for months, not days. By the time the drywall gives when you press it, the sill plate underneath is usually wet too.
- Black or green staining at the bottom corners of the frame. That’s mold and mildew feeding on a wet opening. It’s behind the wall before you see it on the surface.
- The window won’t close square anymore, or the latch catches hard. The frame has racked from water swelling the framing lumber. Once studs move, the window is along for the ride.
- Water pools on the sill after every shower even with the fan running. The weep holes are clogged or pitched wrong, and the condensation path is now inside the wall cavity. No amount of caulk fixes this from the outside.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
A PGT bathroom remodel in Fort Worth runs between $4,500 and $12,000, and the spread is driven by what’s behind the frame, not the frame itself. A straight glass swap where the opening is dry and square lands on the low end. The high end is a full wet-wall rebuild: tear out the shower surround, replace rotted studs, new substrate, new waterproofing, new PGT-compatible window set into a properly pitched sill, then refinish. Here’s the line-item picture:
- Window unit replacement only: $800 – $2,500
- Full shower wall rebuild with window: $3,000 – $5,500
- Water damage repair (studs, insulation, drywall): $1,000 – $4,000
- New tile or solid-surface surround: $2,500 – $6,500
We don’t price off a menu at the door. You get a written scope with the parts, the labor, and the guarantee term before we pull the first trim piece. If the wall needs more than we scoped, that’s our problem, not yours. The 365-Day Done Right Promise covers every PGT bathroom remodel we install – if it leaks, sags, or fails within a year, we come back and correct it at no charge. That’s The Garrison Standard, and it’s in writing on every contract.
DIY or Call Us?
You can check three things safely without touching a tool: read the PGT label in the glass corner to identify your model, press lightly around the drywall under the sill to feel for softness, and look for staining at the frame corners. That’s where the DIY part ends. A bathroom window in a shower is a water-in-the-wall problem waiting to happen, and pulling a frame out of a tiled opening means cutting the waterproofing back, rebuilding the sill, and reflashing so water goes out, not down. Get that wrong and you won’t know for two years – right up until the floor joists start feeling spongy. We pull permits on every Fort Worth job that requires one, and the finished wall gets inspected before the tile goes back on. Call (682) 204-4897 for a free estimate, and we’ll tell you what you’re actually looking at.
FAQs
A PGT vinyl window in a shower opening lasts 12 to 18 years in Fort Worth before the seal or the frame shows real wear. In a dry bathroom, you can stretch that two decades or more with normal use. The Fort Worth climate – hot summers, hard freezes that come on fast, and humidity that spikes every spring – works the seals harder than coastal air does.
Yes, if it’s a failed glass seal and the frame is still square and draining. We rebuild the window with a new insulated glass unit (IGU) rather than hanging a whole new frame. If the frame is warped or the opening is wet, repair is a waste of money – it’ll fail again inside a season.
A straight glass swap is a one-day job. A full wet wall rebuild with tile runs five to seven working days start to finish, including water damage repair, waterproofing, and curing time before the first shower. We schedule the electrician and plumber around our own crew so the job doesn’t stall out.
Yes. We keep PGT-compatible replacement frames, insulated glass units, and waterproofing materials on the truck for most Fort Worth jobs. The manufacturer we work with through our documented materials list also gives us crossover support for KraftMaid, Cambria, and Silestone bathroom and kitchen work, which means we’re not waiting on a factory order when your shower’s already open. Call (682) 204-4897 and we’ll confirm what fits before we schedule anything.
Straight scope, firm price, no surprises at final walkthrough.
Written by Curtis Lane, Owner, Bradford Remodeling Co Fort Worth at Bradford Remodeling Co Fort Worth, serving Fort Worth and nearby areas.
