Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tamko Fence Installation: The Fort Worth Owner’s Guide
Tamko fence installation in Fort Worth typically runs $3,500 to $9,000 for a complete new build, and we stock Tamko-compatible components for repair work that usually falls well under that range. Most homeowners call us because a post has started leaning after a North Texas storm, or the bottom rail rotted against soil that never fully dries between rains. You’ll get a written quote before any shovel goes in the ground, and the work carries our 365-Day Done Right Promise.
What catches Fort Worth homeowners off guard with Tamko fencing isn’t usually the vinyl itself. It’s what’s underneath. The concrete footings get poured too shallow, or the post spacing gets stretched to save a few bucks. The panels themselves hold up, but a fence is only as straight as the posts holding it. Curtis Lane has walked enough sagging fence lines across Fort Worth to know which corners get cut, and our crews set posts to hold through clay soil expansion and August heat. Straight scope, firm price, no surprises at final walkthrough.
Bradford Remodeling Co Fort Worth is an independent contractor. We install and repair Tamko fencing products but are not affiliated with Tamko as a dealer or authorized warranty center. We also work with KraftMaid, Cambria, and Silestone on interior projects, but fencing is Tamko through and through on this page.
Which Tamko Models This Applies To
Most Tamko vinyl privacy fencing in Fort Worth falls into their standard residential line, but the compatibility question that matters is the rail system. Tamko panels lock into routed posts with a bottom rail that carries the pickets. If you have a Tamko Heritage or Lanham panel, your posts are routed, not bracketed. That means a replacement post must come from Tamko’s same series or one spec-matched to the rail depth. A generic box-store post looks close. It isn’t. The rail tongue sits at a different depth, and you’ll find out when the panel doesn’t seat and the top rail pops loose in a spring storm.
For fence installation as a full replacement, we source Tamko panels, posts, rails, and caps directly. For repair work, we match OEM Tamko components to the existing fence. An aftermarket post may save seventy-five dollars up front, but when that post is the one holding the gate to your backyard, we’d rather you not learn what a warranty claim that doesn’t cover your installer’s labor actually costs. We spec Tamko-compatible on repairs, Tamko on new installs, and write both in the quote.
Styles & brands we work with
Signs Your Tamko Fence Installation Is Failing
- Posts leaning out of plumb after a rain. Fort Worth clay soil expands and contracts with moisture. A post set in a 24-inch hole with a 10-inch footing will move. We dig to 30 inches minimum and bell the concrete base so the post has something to hold.
- Bottom rail cracking or splitting at the post. This is almost always drainage. The rail sits low, water pools against it, and the freeze-thaw cycle in a cold January snap does the rest. We set bottom rails with clearance and grade the soil so water runs away from the fence line, not into it.
- Gate dragging or failing to latch. Gates are the first thing to go because they carry weight the rest of the fence doesn’t. Tamko gates need a reinforced post and proper hinge backing. A gate hung on a standard line post will sag inside of two years.
- Pickets rattling in the bottom rail. Tamko pickets should seat tight. When they rattle, the rail has flexed or the post spacing stretched. In a Fort Worth wind event, that movement becomes a sail, and you lose a whole panel instead of a single picket.
- White streaks or chalky surface on panels. Tamko vinyl is formulated for UV exposure, but North Texas sun is relentless. Surface chalking is cosmetic. Cracked panels are structural. We can tell the difference in ninety seconds and won’t sell you a full replacement if a post and two rails fixes the problem.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
A full Tamko fence installation in Fort Worth runs $3,500 to $9,000 for a typical backyard, and the spread comes from linear footage, post depth, gate count, and tear-out of the old fence. On the repair side, a single Tamko post replacement runs $350 to $600 installed, a rail swap runs $150 to $350, and a gate rebuild with proper backing and hardware runs $500 to $1,200.
| Tamko Fence Work | Typical Fort Worth Price |
|---|---|
| Full fence installation (per linear foot, installed) | $35 – $75 |
| Single post replacement | $350 – $600 |
| Bottom rail replacement | $150 – $350 |
| Gate replacement (post, hinges, hardware) | $500 – $1,200 |
| Tear-out and disposal of existing fence | $4 – $8 per linear foot |
Those numbers include the parts, the labor, the concrete, and cleanup. They are the numbers on your written quote before we start, and they don’t move. If a post hole drops into an old tree root or we find a gas line where the gate was planned, we walk the change with you before a single dollar gets spent. No change orders that show up at the end. No invoice surprises. Every Tamko installation we finish carries the full-year written guarantee under the 365-Day Done Right Promise. If it moves, cracks, or fails inside that year, we come back and make it right at no charge.
DIY or Call Us?
Vinyl fencing is not a high-tension hazard like a garage spring, and a homeowner with a post hole digger can technically swap a post. But there’s a reason we see so many DIY Tamko repairs from homeowners in Far North Fort Worth that went sideways. The post comes out, the new one goes in, the panel doesn’t seat because the rail depth is off by a quarter inch, and now you’ve bought the wrong post and spent a Saturday on it. The concrete cures, the first real storm hits, and the post leans because the hole wasn’t deep enough for Fort Worth clay.
What we’d tell a neighbor: you can reset a leaning post as a temporary fix if you tamp it straight and brace it. That buys you time, not a solution. For anything involving the gate, the bottom rail, or a post that anchors a corner, call us. (682) 204-4897. Curtis Lane reads a job site before he reads the quote, which means his scopes don’t grow legs mid-project. You’ll get a written number and a straight answer on whether it’s a repair or a replacement.
FAQs
A properly installed Tamko vinyl fence in North Texas lasts 20 to 30 years. The vinyl itself doesn’t rot. The failure points are the posts and the gate hardware. We set posts deeper than code minimums because Fort Worth’s clay soil shifts more than the manufacturer’s warranty assumes, and we use stainless or coated hardware on every gate so it doesn’t rust out at year six. Call (682) 204-4897 to get your fence’s condition assessed, and we’ll tell you honestly whether you’re looking at a repair or a rebuild.
Yes, in most cases you can replace a single Tamko panel or post without touching the rest of the fence. The catch is matching the color and series. Vinyl fades in Texas sun, so a brand-new panel next to a ten-year-old one will look brighter for a season or two. We’ll tell you that up front and give you the option to wait on a panel if it’s cosmetic only. Call (682) 204-4897 with your fence’s series name if you have it, or send a photo, and we’ll bring the right match.
A standard backyard fence installation in Fort Worth takes two to three days from tear-out to final walkthrough. A post or rail repair is usually done in a half day. Weather and soil conditions can stretch that, especially after a heavy rain when the clay turns to mud and we have to wait for the ground to firm up before setting concrete. Get your written timeline when you schedule the estimate at (682) 204-4897, and we’ll hold to it.
We stock standard Tamko posts, rails, caps, and gate kits on our trucks for the most common Fort Worth repairs, and we order color-matched or series-specific panels with a three to five day lead time. That means most post and rail fixes get done in a single visit. If you’ve got an unusual color or an older Tamko line that’s been discontinued, we’ll find the closest compatible option and show you the spec difference before you spend anything. Call (682) 204-4897 for a free estimate.
If your Tamko fence is leaning, cracking, or the gate won’t latch, get the straight answer from a crew that puts the scope and price in writing before work starts. Call Bradford Remodeling Co Fort Worth at (682) 204-4897 to schedule your free estimate.
Written by Curtis Lane, Owner, Bradford Remodeling Co Fort Worth at Bradford Remodeling Co Fort Worth, serving Fort Worth and nearby areas.
