Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Wellborn Roofing: The Fort Worth Owner’s Guide
If the Wellborn roofing material on your Fort Worth home is failing, we can replace it. A typical Wellborn-compatible roofing repair runs $400 to $1,800 in Fort Worth, and a full replacement runs $8,000 to $20,000 depending on square footage and pitch. Most owners discover the problem the way you just did: a water stain on the ceiling after a hard North Texas storm, granules collecting in the gutters, or a shingle in the yard after last week’s winds.
Bradford Remodeling Co Fort Worth is an independent service provider. We’re not affiliated with Wellborn, but we work with Wellborn-compatible materials regularly, and our crews know exactly what to look for when matching a repair to the existing roof on a Fort Worth home. That matters more than most people think, because a mismatched patch job on a Texas roof doesn’t just look wrong, it fails early.
Which Wellborn Models This Applies To
The term “Wellborn roofing” covers a specific line of architectural asphalt shingles that Wellborn has offered under various model names over the years, including the Wellborn Classic and Wellborn Estate series. These are dimensional shingles, meaning they’re built with two layers laminated together for a thicker profile than a standard three-tab. If you inherited the roof when you bought the house and don’t have the original paperwork, there are ways to identify what you’ve got.
How to identify your Wellborn shingle:
- Look in the attic or garage for leftover bundles. The wrapper carries the model name, color code, and manufacturing date.
- Measure the exposed tab. Wellborn dimensional shingles typically have a 5-5/8 inch exposure, which is a half-inch wider than many competing architectural lines. That affects how a repair blends.
- Check the color. Wellborn’s Fort Worth-era palette includes Weathered Cedar, Slate Gray, and Espresso Brown. Colors get discontinued, which is a real compatibility problem we deal with weekly.
On the OEM versus aftermarket question: Wellborn-branded stock isn’t always available in Fort Worth anymore, and when it is, the price can be 25 to 40 percent higher than an equivalent GAF Timberline or Owens Corning Duration architectural shingle. For a repair patch, a close color and exposure match from a documented brand gets the job done. For a full replacement, we’re honest with you: going with a current-production GAF, CertainTeed, or Owens Corning line gives you a better manufacturer warranty and easier future repairs than chasing a discontinued Wellborn match.
Information worth knowing for Fort Worth specifically: the biggest compatibility gotcha we run into is color fade. A roof that’s baked under Texas sun for eight years is not the same color as the sample board, even if the model number matches. We always carry color swatches from the roofline, never from the catalog.
Styles & brands we work with
Signs Your Wellborn Roofing Is Failing
- Granules in the gutters or at the base of the downspout. Dimensional shingles shed protective granules as the asphalt layer breaks down. Finding a steady buildup means the shingle surface is losing its UV shield, and Fort Worth’s July and August heat accelerates that breakdown faster than most homeowners expect.
- Curling or lifting at the shingle corners. This usually means the adhesive strip under the shingle has let go, or the shingle has absorbed moisture and expanded. Once corners start lifting, wind gets under them and the problem compounds quickly.
- Water stains on the ceiling or wall joints after a storm. This isn’t always visible on the roof surface. A nail that popped, a valley that’s lost its seal, or flashing that’s separated can channel water 10 or 15 feet away from the actual breach before it shows up inside.
- Missing shingles after wind events. Fort Worth gets serious straight-line winds in the spring, and a dimensional shingle with a compromised adhesive strip doesn’t stand a chance. Every missing shingle is an open invitation for the next rain.
- Soft spots or sponginess when you walk the roof. This tells us the substrate, not just the shingle, has absorbed water. That’s the difference between a $400 repair and a section replacement. Substrate failure is the most expensive consequence of ignoring the earlier signs.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For Fort Worth homes, a Wellborn-compatible roof repair typically runs $400 to $1,800. That covers the diagnosis, the replacement materials matched to your existing roof, and the labor to remove the failed section and install the patch properly. What drives the range is straightforward: how many squares are affected, whether the substrate needs replacement, how steep the pitch is, and whether we’re matching a discontinued Wellborn color that requires sourcing an equivalent from a current-producer line.
A full roof replacement runs $8,000 to $20,000 in Fort Worth. That’s a different job entirely. The old roof comes off to the decking, the decking gets inspected and replaced where necessary, underlayment goes down to current code, and the new shingle system goes on with new flashing, new ridge cap, new pipe boots, everything. That’s the by-the-book way we do it, and it’s the only way The Garrison Standard allows.
Every quote from us is a written price before any work starts. You’ll see the material line items, the labor, and the disposal fee, all in dollars, before you sign anything. And once the work is done, it’s covered by the 365-Day Done Right Promise: if the repair or replacement fails within a full year of completion, we return and correct it at no charge. That promise is written into your warranty document and signed at final walkthrough. Your job isn’t closed until you’re holding that piece of paper.
| Fort Worth Roofing Work | Typical Installed Price Range |
|---|---|
| Roof Repair (shingle patch, flashing, small section) | $400 – $1,800 |
| Tile Roof Repair (if applicable) | $600 – $2,500 |
| Full Roof Replacement | $8,000 – $20,000 |
| Metal Roof Installation | $15,000 – $40,000 |
DIY or Call Us?
There are checks any homeowner can safely do from the ground or from a ladder: look for missing or curling shingles, check the gutters for granules, check the attic for daylight coming through the decking after a hard rain. That tells you there’s a problem. It doesn’t tell you how deep it goes.
What you shouldn’t do is walk a pitched roof without proper fall protection, and you shouldn’t try pulling up shingles to “have a look.” Once you break the seal on a dimensional shingle, you’ve created a new leak where there wasn’t one. Roofing work on a Fort Worth home means exposure to heat, heights, and structural surfaces that may already be compromised. That’s not a weekend project. If the substrate is soft, you’re one step from a decking failure. Call (682) 204-4897 and let us put eyes on it properly before you touch anything.
FAQs
A Wellborn dimensional shingle roof in Fort Worth’s climate realistically lasts 15 to 20 years, though the manufacturer’s stated lifespan may be higher. North Texas heat, hail, and wind take a measurable toll on the asphalt layer, and we regularly see roofs that fail at year 16 or 17 that would’ve gone another decade in a milder climate. If your roof is past year 15 and showing the signs above, it’s time for a professional assessment rather than another patch. Call (682) 204-4897 for an exact evaluation, estimates are free.
Yes, if the failure is localized, a repair makes sense. We look at the overall condition of the shingle surface, the age of the roof, and the extent of any substrate damage before we recommend patch versus replacement. If the decking is compromised in multiple areas or the shingles are end-of-life across the whole roof, we’ll tell you straight: a repair would be money spent on a roof that’s heading for replacement in two years anyway. Call (682) 204-4897 for a no-pressure assessment and a written price either way.
A standard residential roof repair in Fort Worth takes four to eight hours on site, including the diagnosis, the work, and the cleanup. A full roof replacement typically takes two to five days depending on the size of the house, the pitch, the weather, and whether the decking needs replacement. We don’t rush a roof, but we also don’t leave a job half-finished overnight if we can help it. The job isn’t done until your site is clean and you’ve signed the final walkthrough with the warranty in hand.
We carry a working inventory of roofing repair materials on the truck, including several architectural shingle colors that match the most common Wellborn palettes found in Fort Worth. We also work directly with suppliers for the full line of GAF, CertainTeed, and Owens Corning products when a full replacement is the right call. Alongside roofing, we stock and install parts for KraftMaid, Cambria, and Silestone lines as well, which matters if a roof leak has damaged the interior of your home and you’re already facing a repair that extends beyond the roofline.
Straight scope, firm price, no surprises at final walkthrough. That’s how Curtis Lane and the Bradford Remodeling crew run every roof we touch in Fort Worth. If you’ve got a Wellborn roof showing signs of failure, call (682) 204-4897 now. A real person picks up, day or night, and we’ll get you scheduled for a free estimate with a written price before a single tool leaves the truck.
Written by Curtis Lane, Owner, Bradford Remodeling Co Fort Worth at Bradford Remodeling Co Fort Worth, serving Fort Worth and nearby areas.
