Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Cabinet Installation Cost in Fort Worth?
Cabinet installation in Fort Worth typically runs between $4,000 and $13,000 for a full kitchen, with most homeowners paying around $7,500 for a mid-range project using stock or semi-custom cabinets. That figure includes labor, which hovers between $50 and $150 per linear foot or $75 to $125 per hour depending on the crew and scope. Your final number moves based on cabinet grade, kitchen size, whether you’re refacing or installing new boxes, and what condition the walls and floor are in before the first screw goes in.
We’re Bradford Remodeling Co Fort Worth, and we install cabinets the way we do every other job: with a written price before work starts and a one-year guarantee on the finished product. If you’re planning a kitchen upgrade in Fort Worth, here’s the pricing detail you need to make a decision without getting surprised later.
Key Takeaways: Cabinet Installation Pricing in Fort Worth at a Glance
- A full kitchen cabinet install in Fort Worth costs $4,000 to $13,000 in 2026.
- Stock cabinets from a big-box line run $60 to $200 per linear foot; semi-custom runs $100 to $350; full custom starts around $300 to $700+ per linear foot.
- Labor typically lands between $50 and $150 per linear foot, or $75 to $125 per hour for a two-person crew.
- A 10×10 kitchen (the industry measuring standard) with stock cabinets usually totals $4,000 to $7,000 installed.
- The same kitchen with semi-custom cabinetry lands at $7,000 to $11,000, and full custom starts around $11,000 and climbs from there.
- Refacing existing cabinet boxes costs $2,500 to $6,000 and is the lower-cost alternative when the cabinet layout still works and the boxes are structurally sound.
Cabinet Installation Cost Breakdown (2026)
Here’s the line-item breakdown for Fort Worth cabinet work in 2026. These are the real numbers we work with when we write a proposal. None of them move at the door.
| Line Item | Cost Range | Notes |
|---|---|---|
| Stock cabinets (per linear foot) | $60 – $200 | Big-box or builder-grade lines. Limited door styles and finishes. |
| Semi-custom cabinets (per linear foot) | $100 – $350 | KraftMaid and Wellborn land here. More sizes, better hardware, plywood boxes. |
| Full custom cabinets (per linear foot) | $300 – $700+ | Built to spec. Any wood species, any finish, any dimension. |
| Installation labor (per linear foot) | $50 – $150 | Includes leveling, shimming, mounting, door and drawer alignment. |
| Full kitchen install (10×10, stock) | $4,000 – $7,000 | Standard L-shape or galley, no layout changes. |
| Full kitchen install (10×10, semi-custom) | $7,000 – $11,000 | Most common Bradford scope in Fort Worth. |
| Full kitchen install (custom) | $11,000 – $13,000+ | Full tear-out, custom boxes, premium finish work. |
| Cabinet refacing (doors + veneer + hardware) | $2,500 – $6,000 | Keeps existing boxes; replaces doors, drawer fronts, and hinges. |
| Island cabinet install (add-on) | $1,500 – $4,000 | Depends on island size, storage config, and countertop load. |
| Hardware installation (pulls, knobs, soft-close retrofits) | $200 – $800 | Soft-close hinge and slide upgrades run $15 to $40 per door/drawer. |
Those ranges cover a straightforward install: cabinets on hand, walls in acceptable shape, existing rough-in for plumbing and electrical staying where it is. The minute you move a sink, relocate a dishwasher line, or ask for a floor-to-ceiling pantry wall with pull-out shelves, the number shifts. We’ll walk through what moves it and why below.
What Affects Cabinet Installation Pricing in Fort Worth
Five things move the number on a Fort Worth cabinet job more than any others. We see these pattern across Tarrant County every week, from Ridglea Hills to Wedgwood to the neighborhoods off Camp Bowie Boulevard.
- Cabinet grade. Stock boxes from a home center are the entry point. Semi-custom lines like KraftMaid and Wellborn, which Bradford installs regularly, open up deeper drawers, plywood box construction, and full-extension slides. Full custom changes the whole conversation. Each step up adds $100 to $350 per linear foot.
- Kitchen size and layout. The industry standard for quoting is a 10×10 kitchen with 20 to 25 linear feet of cabinetry. A larger U-shaped kitchen in a Fairmount bungalow or a split-level out in Haltom City runs 30 to 40 linear feet. More boxes, more doors, more labor hours.
- Wall and floor condition. Fort Worth homes built before 1980 often have settled floors and out-of-plumb walls. If the substrate behind the cabinets isn’t flat, the crew spends extra time shimming and scribing. We factor that into the written price up front.
- Labor rates and crew size. Two-person cabinet crews in Fort Worth bill $75 to $125 per hour combined. A complex install with crown molding, light rail, and a tricky corner cabinet can take two days instead of one. That’s 16 billable hours versus 8. On a $7,000 job, labor accounts for roughly $1,200 to $2,400 of the total. The rest is product, hardware, and job overhead.
- Permits and code compliance. Most cabinet swaps don’t require a Fort Worth permit, but if you’re touching electrical or plumbing rough-in as part of the install, the Development Services Department may want a permit. That’s not optional. We handle the paperwork on our end and list any applicable fees in the written quote so there’s no surprise invoice.
Stock vs. Semi-Custom vs. Custom: What You’re Actually Paying For
When we bid a cabinet job in Fort Worth, the first question we ask is which grade you’re planning around. Each tier earns its price through specific differences you can see and touch. Here’s the honest breakdown.
Stock cabinets ($4,000 to $7,000 for a full kitchen). These come in fixed sizes. You build the kitchen around the cabinets, not the other way around. Particleboard boxes, limited door profiles, standard hinge hardware. They look fine for a rental or a quick pre-sale refresh. They will not hold up the way homeowners in Tanglewood or Mira Vista expect them to.
Semi-custom ($7,000 to $11,000). This is the sweet spot for most Fort Worth kitchens. KraftMaid and Wellborn, the two lines Bradford specs most often, offer plywood box construction, soft-close hinges as standard on many series, and door styles that range from shaker to raised panel to slab. You pick the wood, the stain, the finish. The cabinets are built to order but within a defined catalog, which keeps wait times to three to six weeks and pricing within reason. This is the range where you stop paying for limitations and start paying for what you actually want.
Full custom ($11,000 to $13,000+). A cabinetmaker builds to the exact dimensions of your kitchen. Nothing is a filler piece. Odd angles, appliance garage, integrated toe-kick drawers, inset doors with hand-rubbed finishes; all possible. This is the choice when the kitchen is architecturally specific and you intend to stay in the house for a decade or more. The wait is longer and the price reflects the labor hours in the shop, not just on the job site.
Kitchen Remodels and Cabinet Work Across Fort Worth: What We See Locally
Fort Worth housing stock runs from 1920s craftsman bungalows near Magnolia Avenue to 1990s brick ranches in Saginaw and 2010s builds in northwest Tarrant County. Where you live changes what a cabinet job actually looks like on the ground.
In the older central neighborhoods like Fairmount, Ryan Place, and Mistletoe Heights, we regularly deal with plaster walls, slightly racked framing, and kitchens that have been renovated three times since the Eisenhower administration. The cabinet boxes come out and the wall substrate often needs attention before new boxes go in. That adds a few hundred dollars to the scope and keeps the install honest instead of hiding the problem behind filler strips. Out in places like Benbrook, Keller, or the newer sections of Alliance, the framing is truer and the install is faster. The cabinets are often newer too, which means the job is more likely a partial replacement or a reconfig than a full tear-out.
This matters because a national cost aggregator can’t tell you that a Fairmount install runs $500 to $800 higher on average than the same linear footage in a 2015 Lennar build north of Loop 820. We can, because we’ve done both. Curtis Lane has run Bradford Remodeling Co Fort Worth with this kind of local knowledge since the beginning, and our crews know which Fort Worth neighborhoods throw which curveballs.
Cabinet Installation: What to Expect From the Install Itself
There is a right way to hang cabinets, and whether you hire Bradford or someone else, here’s what a proper install looks like.
The crew locates studs with a stud finder or by tapping, marks the level line with a laser, and starts with the upper cabinets. Uppers get secured with cabinet screws into studs, not drywall anchors. Adjacent boxes get clamped and screwed together at the face frame or through the sides. Shims bring everything to level and plumb before the screws are fully tightened. Then the lowers go in, leveled on the floor as well as on the wall, because subfloors in Fort Worth slab homes are rarely dead flat. Doors and drawers get adjusted for reveal; soft-close hardware gets tested; crown molding and light rail go on last if they’re part of the job. The site gets swept, the boxes empty, the hardware in a ziplock bag on the counter.
That is what “squared away” looks like. You get a signed written guarantee in your hand before we leave. If something fails within a year, we come back and correct it at no charge. That’s the 365-Day Done Right Promise, and it is part of every Bradford cabinet installation in Fort Worth. We don’t ask you to trust that we’ll show up. We hand you a piece of paper that says what happens if we don’t hold up our end.
How to Save on Cabinet Installation Without Cutting Corners
You can reduce the cost of a cabinet install in Fort Worth by making deliberate choices, not by finding a cheaper crew. Here’s where the money actually comes out.
Keep the layout. The single biggest cost driver beyond cabinet grade is moving plumbing or electrical. If the sink stays where the sink is, you save $500 to $1,500 in rough-in work before a cabinet even goes in. A dishwasher that moves four feet is not a minor change. It’s a plumbing rough-in, an electrical circuit check, and possibly a cabinet box redesign.
Reface instead of replace when the boxes are sound. If the cabinet boxes are structurally fine, the interior layout works, and you just dislike the door style or finish, refacing lands at $2,500 to $6,000 in Fort Worth versus $4,000 to $13,000 for full replacement. We’ll tell you honestly if your boxes are worth refacing. If we can put a screwdriver through the side panel without much effort, they aren’t.
Get three bids, but read them side by side. A $6,500 bid that doesn’t include soft-close hardware, crown molding, or a permit is not cheaper than a $7,500 bid that does. Fort Worth is a competitive market for remodelers. Compare the actual line items, not the bottom number.
Ask for a written price before you sign anything. This is not really a money-saving tip; it’s a money-protecting tip. Every Bradford quote is a written price. You can call us at (682) 204-4897 for a free estimate, and the number we give you is the number on the contract. No door-pressure add-ons. No recalculation when the crew shows up. We’ve run this way since 2004 as part of the Garrison Partners family, and it’s how The Garrison Standard was built: the price is written down before the first tool comes off the truck.
Why Fort Worth Homeowners Pick Bradford for Cabinet Installation
We’re not the cheapest cabinet installer in Fort Worth, and we don’t want to be. Cheapest in this trade usually means a crew that underbid the job and will make it back somewhere else. Here’s what we are.
Bradford Remodeling Co Fort Worth is held to The Garrison Standard, which is the operating framework for every Garrison Partners location since 2004. It covers three things: a written price before work starts, background-checked and uniformed technicians on every job, and a live person answering the phone 24 hours a day. When you call (682) 204-4897 at 9pm on a Sunday because you have a question about your in-progress kitchen, you talk to a person, not a voicemail. That’s not a small thing. We know because homeowners tell us constantly that the last contractor went dark the moment the deposit cleared.
We also install documented brand lines. KraftMaid and Wellborn for cabinetry. Cambria and Caesarstone if the job extends to countertops. Kohler and Moen for fixtures. When a cabinet door ships with a defect, we file the manufacturer claim and keep your kitchen moving. You are not left holding a broken door and our apologies.
The 365-Day Done Right Promise is the part that matters most at close-out. Every cabinet installation we complete in Fort Worth is covered in writing for a full year. If a hinge fails, a door sags, or a drawer slide binds inside that year, Bradford returns and corrects it at no charge. That’s not a sales claim. It’s a contractual term printed on the document you sign and the document you keep.
Cabinet Installation in Fort Worth: What It Costs and What You Get
To put it back in one place: cabinet installation in Fort Worth runs $4,000 to $13,000 for a full kitchen. Stock cabinets land at the bottom of that range. Semi-custom from KraftMaid or Wellborn lands in the middle. Full custom lands at the top and beyond. The crew you hire matters as much as the cabinets you buy. A written price, a clean job site, and a one-year guarantee in your hand are the difference between a kitchen you enjoy and a punch list you chase for three months.
Bradford Remodeling Co Fort Worth gives you the first number over the phone and the final number in writing before work begins. Curtis Lane and the team have been doing it that way under The Garrison Standard since day one. If you’re planning cabinet work in Fort Worth, start with a free estimate. Call (682) 204-4897 and we’ll give you a real number for your kitchen, not a range with a shrug.
FAQs: Cabinet Installation Cost in Fort Worth
How much does it cost to install cabinets in a 10×10 kitchen?
A 10×10 kitchen with stock cabinets runs $4,000 to $7,000 installed in Fort Worth. Semi-custom lines like KraftMaid or Wellborn bring that to $7,000 to $11,000. Full custom starts around $11,000. That includes tear-out of old cabinetry (if needed), install labor, and hardware. For an exact number on your kitchen, call (682) 204-4897. Estimates are free and put in writing.
Is it cheaper to reface cabinets or replace them?
Refacing runs $2,500 to $6,000 in Fort Worth, which is roughly 40 to 60 percent less than full replacement at $4,000 to $13,000. Refacing only makes sense when the cabinet boxes are structurally sound and the layout works for you. If the interiors are falling apart or you want to reconfigure the kitchen, replacement is the better spend. We’ll assess your boxes honestly. Call (682) 204-4897 for a straight answer.
How much is labor to install cabinets per linear foot?
Cabinet install labor in Fort Worth runs $50 to $150 per linear foot, or $75 to $125 per hour for a two-person crew. A standard 20 to 25 linear foot kitchen means $1,000 to $3,750 in labor alone. Complex installs with crown molding, odd corners, or substrate repair run toward the upper end. Our labor rate is part of the written quote you get before work starts.
How long does cabinet installation take?
A standard 10×10 kitchen with stock or semi-custom cabinets takes 1 to 3 days to install once the cabinets are on site. Full custom jobs with significant layout changes or substrate repair can take 4 to 7 days. Cabinet lead times (order to delivery) run 2 to 6 weeks for semi-custom lines. We schedule the install around the delivery date so your kitchen isn’t torn apart while you wait.
Do I need a permit to install cabinets in Fort Worth?
Most cabinet-only installs do not require a permit if you’re replacing boxes in the existing layout. If the scope includes moving plumbing, relocating electrical, or structural changes to walls, the City of Fort Worth Development Services Department may require a permit. Bradford handles permit paperwork when it’s required and lists any applicable fees in the written quote. You’ll never get a surprise filing fee.
What cabinet brands does Bradford Remodeling install?
Bradford installs KraftMaid and Wellborn cabinetry as our primary semi-custom lines, along with additional brands from our documented roster. These are name-brand products with manufacturer specifications and warranties that back Bradford’s own 365-Day Done Right Promise. We can also install big-box stock lines if that’s the right scope for your budget. The brand decision belongs in your written quote, not in a salesman’s throat-clearing.
Pricing reflects the Fort Worth market as of 2026. Bradford Remodeling Co Fort Worth offers free estimates – call (682) 204-4897.
Written by Curtis Lane, Owner at Bradford Remodeling Co Fort Worth, serving Fort Worth and Tarrant County since 2004. Curtis leads every Bradford project under The Garrison Standard: a written price before work starts, background-checked crews, and a one-year guarantee on every completed job.
What Our Customers Say
"Respectful crew. Covered the floors and swept every day."
- Jackie T."Fixed price, written scope, and no surprise charges."
- Wes D."Home remodel with a new floor plan. Handled structural work and permits without drama."
- Gus R.
