Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Countertop Installation Cost in Fort Worth?
Countertop installation in Fort Worth typically runs between $2,000 and $6,500 for a standard kitchen, with most homeowners landing around $3,800. Material choice drives the biggest swing: laminate sits at the low end, quartz and granite occupy the middle, and high-end natural stone pushes toward the top of that range. If you’re replacing counters in a bathroom or laundry room, expect to pay on the lower end; a full kitchen with an island and waterfall edges lands higher.
We give every Fort Worth homeowner a written price before any work starts. No numbers that move at the door. Here’s exactly how those numbers break down.
Countertop Installation Cost Breakdown (2026)
Here are the line-item costs we see across Fort Worth kitchens in 2026. These reflect what Bradford Remodeling Co quotes on a typical job, including material, fabrication, and installation labor:
| Line Item | Typical Range (Fort Worth, 2026) | Notes |
|---|---|---|
| Laminate countertops (per sq ft installed) | $25 – $50 | Budget-friendly; 40 – 60 sq ft kitchen runs $1,000 – $3,000 |
| Granite (per sq ft installed) | $45 – $90 | Most common mid-range choice in Fort Worth |
| Quartz (per sq ft installed) | $55 – $110 | Engineered stone; Cambria and Caesarstone land at the upper end |
| Marble (per sq ft installed) | $70 – $150 | Soft stone; porous; needs sealing |
| Butcher block (per sq ft installed) | $40 – $80 | Warm look; requires oiling |
| Standard kitchen install (40 – 60 sq ft) | $2,000 – $6,500 | Includes template, fabrication, install, sink cutout |
| Bathroom vanity countertop | $400 – $1,400 | Smaller footprint, faster job |
| Sink cutout and mounting | $150 – $350 | Undermount typically costs more than drop-in |
| Faucet hole drilling | $50 – $150 | Per additional hole beyond standard |
| Old countertop removal and disposal | $200 – $600 | Depends on material and access |
| Edge profile upgrade (bullnose, ogee, waterfall) | $10 – $40 per linear ft | Waterfall edges on islands add $800 – $2,000 total |
Those numbers are for the Fort Worth market specifically. Fort Worth homes skew older in neighborhoods like Wedgwood, Ridglea, and Meadowbrook, where cabinets may sit uneven on settled slabs. That means more time leveling the substrate before new counters go down, which is honest labor that shows up in the quote. We’d rather tell you that on the front end than surprise you mid-job.
What Affects Countertop Installation Pricing in Fort Worth
- Material grade and thickness. A 3cm quartz slab costs more than a 2cm laminate, but it doesn’t need plywood underlayment, so fabrication and install labor shift. Cambria and Caesarstone stay at the high end of engineered stone pricing because of their manufacturer spec and warranty; you pay for what’s documented.
- Slab size and seam count. Fort Worth kitchens with long runs or L-shaped layouts usually need at least one seam. Fewer seams means cleaner look but requires larger slabs, which cost more to template and fabricate.
- Edge profile. A standard eased edge is typically included. Bullnose, ogee, bevel, and waterfall edges add real dollars per linear foot because the fabricator runs additional passes.
- Access and site conditions. Fort Worth’s older neighborhoods, like Fairmount and Ryan Place, often have tight doorways, narrow hallways, and kitchens that haven’t moved since the 1940s. If the slab has to be carried around back or through a window, the install crew makes it work, and that time is part of the written quote.
- Sink and faucet configuration. An undermount sink requires more precise cutout and mounting work than a drop-in. Farmhouse-style sinks add the most labor because the front edge cut is unforgiving.
- Backsplash coordination. If the new counters change the wall profile, you might need a small adjustment where the backsplash meets the surface. We flag this during the template visit so the number on paper doesn’t change later.
One more Fort Worth-specific note: clay soil means slab movement. Houses in the Como, Northside, or Polytechnic areas sit on expansive clay that swells and contracts with rainfall and drought. A countertop that goes down square today may sit slightly off in two years if the foundation has moved. We check the cabinet tops with a level before template day. If the substrate is out of whack, we correct it, because putting stone on an unlevel base is how you get cracks.
Material Pricing: What You Get at Each Price Point in Fort Worth
Laminate: $1,000 – $3,000 for a typical kitchen
Laminate is the honest budget choice. Modern laminate doesn’t look like the 1980s Formica your grandmother had. It comes in convincing stone and wood patterns, and it installs fast because the substrate is simple. The tradeoff is durability: a hot pan will scorch it, and a dropped cast-iron skillet can chip the surface. If you’re prepping a rental in the Wedgwood area or fixing up a starter off Camp Bowie, laminate gets the job done without emptying the account.
Granite: $2,500 – $5,500 for a typical kitchen
Granite is the workhorse of Fort Worth countertops. It handles heat, resists scratches, and comes in enough color variation to fit any cabinet style. Every slab is different, so you pick your exact piece at the stone yard. It needs sealing once a year to keep stains out. For most Fort Worth kitchens, granite gives the most durability per dollar.
Quartz: $3,000 – $6,500 for a typical kitchen
Quartz is engineered stone: crushed quartz bound with resin. It doesn’t need sealing, it’s non-porous, and the color is consistent from slab to slab because it’s manufactured, not mined. Cambria and Caesarstone are the two brands Bradford installs most in Fort Worth, and both come with manufacturer warranties that sit on top of our own 365-Day Done Right Promise. You pay a premium for quartz, and what you get is predictability: the slab you approve is the slab that arrives.
Marble: $3,500 – $8,500 for a typical kitchen
Marble is beautiful and unforgiving. It etches when acids touch it, meaning lemon juice, tomato sauce, and red wine all leave dull spots. It stains unless sealed regularly. Some bakers still want it for the cool rolling surface. We’ll install marble anywhere in Fort Worth, but for a kitchen that actually gets cooked in, we usually tell homeowners to look at quartz with a marble-look pattern first.
Butcher block: $1,800 – $4,000 for a typical kitchen
Butcher block brings wood warmth at a mid-range price. It works well on islands, where it can take the wear of daily prep separate from the main stone runs. It needs oiling every few months, and it will dent and stain over time. If you like a counter that shows its life, this is a good fit.
How to Save on Countertop Installation
A few straight answers on keeping the number down without cutting corners that matter:
- Choose a standard edge profile. Eased or slightly eased edges are usually included in the per-square-foot price. Every upgrade edge adds fabrication time.
- Keep the sink configuration simple. A standard undermount single or double bowl costs less to cut and install than a farmhouse apron sink.
- Plan seams carefully. Tell the template tech where you’re willing to accept a seam. On a standard L-shaped run, one well-placed seam saves slab waste, which keeps the per-slabs-used count down.
- Do the demolition yourself if you’re capable. Removing old counters and disconnecting the sink before the crew arrives can take $200 – $600 off the quote. Just don’t touch the plumbing shutoffs if you’re not confident; we’ll handle it inside the written price.
- Buy during the same remodel. If you’re already doing a home remodel, bundling countertops with cabinet work usually trims a little off the combined labor because the crew is already on site and the schedule is set.
One thing we won’t tell you to do is buy the cheapest slab you can find. A $40-per-square-foot granite that shows up cracked on delivery costs more in the end than the $55 stone that was handled right. The written price covers the whole job, and the 365-Day Done Right Promise covers what happens after. Call (682) 204-4897 for a free estimate and we’ll walk the numbers with you.
What Bradford Remodeling Co Fort Worth Does Differently
Curtis Lane runs Bradford Remodeling Co Fort Worth by a standard that puts the price and the guarantee on paper before a saw ever spins up. It’s called The Garrison Standard, and it governs how every job in Fort Worth gets quoted, run, and closed. Here’s what that looks like on a countertop install:
- Written price before work starts. You get a line-item quote showing material, fabrication, install, and any substrate correction needed. That number doesn’t move unless you change the scope.
- Brand-name materials, documented. We install Cambria and Caesarstone quartz, along with granite, marble, and laminate from suppliers we’ve vetted. Every material has a manufacturer spec behind it, which means the warranty isn’t just ours; it’s theirs too.
- Background-checked, uniformed technicians. You’ll know exactly who is walking through the door before they arrive. Our crews show up in Bradford uniform, on time, and they clean the site before they leave.
- A live person answers the phone, 24/7. Call (682) 204-4897 at any hour and you’ll get a real person. Not a voicemail, not a callback queue.
- The 365-Day Done Right Promise. Every completed countertop job carries a full-year written guarantee. If the work fails inside that window, Bradford comes back and corrects it at no charge. Not prorated, not hedged. That’s the whole promise.
At job close, you get a signed written guarantee in your hand, a clean site, and a documented scope of what went in. That’s what “squared away” means to us. If you’ve been burned by a contractor who no-showed or re-priced at the door, this is the fix.
Bradford’s Countertop Installation Process in Fort Worth
Here’s how a countertop job runs with us, start to finish, so nothing is a surprise:
- Call and measure. You call (682) 204-4897, we schedule a site visit. Our tech checks the substrate, cabinet tops, and access points.
- Written quote. You get a line-item price covering material, fabrication, install, and any corrections. That number is firm.
- Template day. A fabricator comes out and takes digital measurements of the exact cabinet footprint, sink placement, and edge profile.
- Fabrication. The slab is cut to template at the stone yard. You pick the exact slab; the fabricator works from the digital template.
- Install day. The crew arrives, removes old counters if we’re handling it, levels the substrate, sets the new tops, mounts the sink, and cleans up.
- Final walkthrough. Curtis Lane or a project lead walks the job with you. You sign the written guarantee. The site is clean. Done.
That process is the same whether you’re in Ridglea Hills, TCU area, or out near Benbrook. If you’re in the middle of a countertop installation in Fort Worth and have questions mid-project, we answer the phone. That’s not a perk; it’s how the job runs.
Can You Install Countertops Yourself? What to Know Before You Try
We’re going to be straight with you: installing a countertop is not the place to learn a new trade. Laminate might look forgiving, but the cuts have to be perfect against your walls, and Fort Worth walls are rarely square. Natural stone fabricators use digital templates and water-jet saws for a reason. Getting it wrong means a slab you already paid for is unusable, and stone yards don’t take back a cut slab.
If the job involves moving a stone slab, there’s a real safety risk. A granite slab for a typical kitchen runs 300 to 500 pounds. A professional install crew uses suction clamps and a two-person minimum lift, and they’ve done it a thousand times. Dropped slabs crack toes, crush fingers, and destroy cabinets. That’s why we always recommend a trained professional for anything beyond a small bathroom vanity top, and even then, the weight will surprise you.
The honest answer: hire it out. The labor is a small portion of the total price, and it’s covered by the written guarantee when we do it.
Countertop Installation Cost in Fort Worth: How We Compare
Here’s the reality of Fort Worth pricing. Big-box stores advertise low per-square-foot numbers and then add fabrication, templating, sink cutouts, and delivery as separate line items, which pushes the final number closer to ours anyway. Independent stone shops run lean, but if the shop closes, your warranty goes with it.
Bradford Remodeling Co Fort Worth sits in the middle of the 2026 market, around $3,800 for a typical kitchen, and the number we quote is the number you pay. The Garrison Standard puts every cost in writing up front, and the 365-Day Done Right Promise means the warranty isn’t dependent on a third-party shop that might not be around next year. Since 2004, the Garrison Partners family has held every location, including ours, to that standard, though each shop remains independently owned and operated.
We don’t win on being the cheapest bid in Fort Worth, and we won’t pretend otherwise. What we do is give you a real number, documented materials, and a signed guarantee. That’s what most homeowners who’ve been burned are actually looking for.
Questions to Ask Any Countertop Contractor in Fort Worth
Before you sign anything, ask these questions. If a contractor hedges on any of them, that’s your answer:
- Is the template fee included in the quote? Some shops charge $200 – $400 for the template visit and don’t tell you until the bid comes back higher.
- Does the price include sink cutout, faucet holes, and disposal of the old counters? These are line items that can add $400 – $900 if they’re “extra.”
- What edge profiles are included? If standard eased edge isn’t included, the upgrade could surprise you.
- Who performs the install? A subcontractor or a W-2 crew? Bradford uses background-checked, uniformed technicians on every job.
- What does the warranty cover, and for how long? Get it in writing. Our 365-Day Done Right Promise covers the full job for a year, and you get the signed guarantee at close.
FAQs – Countertop Installation Cost
How much does countertop installation cost in Fort Worth, TX?
Countertop installation in Fort Worth costs $2,000 to $6,500 for a typical kitchen in 2026. The average job runs about $3,800. Laminate starts around $1,000 for a full kitchen, while high-end quartz or marble can push past $8,000 with upgraded edges and a big island. Call (682) 204-4897 for a free written estimate so you get a number that matches your actual kitchen.
Is it cheaper to repair or replace countertops in Fort Worth?
For most damage, replacement makes more financial sense than repair. Repairing a cracked granite or quartz top in Fort Worth usually runs $300 to $1,000, but the repair is visible and the crack often returns if the substrate wasn’t leveled first. If your counters are over 15 years old, a full replacement at $2,000 to $6,500 usually beats patching. We’ll tell you straight which one your kitchen actually needs; call (682) 204-4897 for that conversation.
How much does it cost to replace countertops in a small kitchen in Fort Worth?
A small Fort Worth kitchen, roughly 25 to 35 square feet of countertop space, costs $1,200 to $3,500 depending on material. Laminate lands between $1,000 and $1,700, granite between $1,500 and $2,800, and quartz between $1,800 and $3,500. Smaller jobs carry a slightly higher per-square-foot rate because the crew still has to template and travel, but the absolute number stays low.
How long does countertop installation take in Fort Worth?
From template day to install, expect 5 to 14 days. The template visit takes about an hour. Fabrication runs 3 to 10 days depending on the stone yard’s queue, which gets busier in spring and early summer in Fort Worth. Install itself is usually a single day, including old counter removal, leveling, setting the new tops, mounting the sink, and cleanup.
Can Bradford Remodeling Co install countertops the same week in Fort Worth?
It depends on current scheduling and material availability. Laminate jobs can sometimes install within a week of the template visit. Quartz and granite depend on fabrication queue, which runs 5 to 10 days during the busy spring season. Call (682) 204-4897 and our project lead will give you a real date range before you commit to anything.
What is the most affordable countertop material in Fort Worth?
Laminate is the most affordable countertop material in Fort Worth, running $25 to $50 per square foot installed. A full kitchen in laminate lands around $1,000 to $3,000. Modern laminate has come a long way in appearance, though it won’t hold up to heat or scratches like stone will. Call (682) 204-4897 and we’ll give you the straight cost comparison for your exact kitchen size.
Get a Written Countertop Installation Price in Fort Worth
If you’re ready to replace your counters or you want a real number to plan around, call Bradford Remodeling Co Fort Worth at (682) 204-4897. You’ll get a live person on the phone, a written price before any work starts, and a signed guarantee on the finished job. No no-shows, no surprise invoices, no numbers that move at the door. Just the price on paper and a crew that shows up and gets it done.
Pricing reflects the Fort Worth market as of 2026. Bradford Remodeling Co Fort Worth offers free estimates – call (682) 204-4897.
Written by Curtis Lane, Owner at Bradford Remodeling Co Fort Worth, serving Fort Worth since 2004.
What Our Customers Say
"Respectful crew. Covered the floors and swept every day."
- Jackie T."Fixed price, written scope, and no surprise charges."
- Wes D."Home remodel with a new floor plan. Handled structural work and permits without drama."
- Gus R.
